Helium066 Chu kỳ tín hiệu xung 12V-24V Độ trễ Bộ hẹn giờ Công tắc bảng điều khiển MOS kép tại Lotte Market

Giới thiệu Helium066 Chu kỳ tín hiệu xung 12V-24V Độ trễ Bộ hẹn giờ Công tắc bảng điều khiển MOS kép tại Lotte Market

Welcome to the helium066 store!
ready to send good quality best price
【Purchase Notes】
1. All products are shipped from overseas, the goods will arrivewithin 1-2 weeks
2. Good quality, group purchase price, please leave a message to customer service
3. If you have any questions, please contact us, we will be happy to solve with you.
Follow us----Leave a message after placing an order----free gift
Thank you so much for your visit

Features:
1. 16 opto isolated digital inputs,3 opto isolated digital outputs;
2. Upgrade algorithm,support soft interpolation,fixed arc interpolation bug of the old version;
3. Analog spindle control 0-10V spindle control (can be modified as PWM output);
4. Interface clear and simple, powerful, almost meet all requirements
5. There is a key emergency STOP function (STOP key), with reverse connection protection, reverse connection does not burn
6. Added sleep mode, after enabling, 5 minutes without any operation, automatically close the display, any button to wake up
7. Different OP, CL and LOP parameters can be set, which are independent and saved separately
8. Set parameters for automatic power off and save
9 With optocoupler isolation, enhance anti-interference ability, industrial level circuit board, set parameters after power off forever memory

Specification:
2: Trigger Source: Active-high (3.0V-24V), have optocoupler isolation, can improve the system's anti-jamming capability (customers can also shorting common ground).
Output capacity: 5V--36V DC, 15A continuous current at room temperature, 400W power (maximum current up to 30A under auxiliary cooling conditions)
Service life: infinite times switch
Working temperature: - 40~85℃
Weight: Approx.16g/0.6oz
 
Operating mode:
P1: trigger signal, the relay is on ”OP” time, and then disconnect; in the ”OP” time, as follows:
P1.1: signal is triggered again, invalid
P1.2: signal is triggered again, the clock is reset
P1.3: Signal trigger again, relay off, stop the clock;
P-2: trigger signal, the relay off ”CL” of time, the relay on ”OP” time, and then disconnect relay;
P3.1: trigger signal, the relay is turned on after the ”OP” time, the relay off ”CL” time, then the operation cycle, if the trigger signal period, the relay off, stop the clock; the number of cycles ( ”LOP ”) can be set.
P3.2: without triggering signal, the relay is on ”OP” time, the relay off ”CL” time, and has been cycling; frequency ( ”LOP”) cycle can be set;
P-4: signal holding function. If there is a trigger signal timing is cleared, the relay remains on; when the signal disappears, after the timing ”OP” time, the relay is; if another signal during timing, timing is cleared;

# Công tắc hẹn giờ trễ chu kỳ tín hiệu Pulse # Công tắc hẹn giờ trễ # Công tắc hẹn giờ trễ chu kỳ # Công tắc hẹn giờ trễ chu kỳ # Chuyển tiếp trễ chu kỳ # Trì hoãn khi tắt mô-đun chuyển tiếp