Notice: file_put_contents(): write of 3198 bytes failed with errno=28 No space left on device in /home/libs.com/public_html/libs_chung/v4/_product.php on line 111

Warning: file_put_contents(): Only -1 of 3198 bytes written, possibly out of free disk space in /home/libs.com/public_html/libs_chung/v4/_product.php on line 111
Dụng cụ đo góc bánh xe Z2N9 C6M0 - Lotte Market

Dụng cụ đo góc bánh xe Z2N9 C6M0 tại Lotte Market

Thương hiệu: | Xem thêm Bánh xe, Vành & Phụ kiện Thương hiệu  

Mô tả ngắn về Dụng cụ đo góc bánh xe Z2N9 C6M0 tại Lotte Market

 Magnetic Gauge Tool measures the Camber and Caster angle on the wheel hub or brake disc.  Has a simple leveling adjustment from -5 degrees to 5 degrees.  Allows adjustment to maintain correct wheel alignment and even tyre wear.  Easy to read and convenient to operate. Remove the four-wheel positioning sensor (clamp) and remove the tire;. Adjust the level to zero;.
: Còn hàng
: Shopee
333.300đ 333.300đ
** Quét mã QR bằng Zalo để mua trên điện thoại

Giới thiệu Dụng cụ đo góc bánh xe Z2N9 C6M0 tại Lotte Market

Features:Dụng cụ đo góc bánh xe Z2N9 C6M0
 Magnetic Gauge Tool measures the Camber and Caster angle on the wheel hub or brake disc.
 Suitable for accurate checking of the castor and camber angle.
 Has a simple leveling adjustment from -5 degrees to 5 degrees.
 Magnetic gauge attaches to the hub or disc brake.
 Allows adjustment to maintain correct wheel alignment and even tyre wear.
 Allows you to return the strut to the original camber position after dismantling and re-assembling the suspension or to check the amount of camber change before re-installing.
 Easy to read and convenient to operate.Dụng cụ đo góc bánh xe Z2N9 C6M0
Instructions for use:
1. Remove the four-wheel positioning sensor (clamp) and remove the tire;
2. Carefully suck the magnetic level on the side of the brake wheel;
3. Adjust the level to zero;
4. Install the required positioning special parts;
5. Use special tools and adjust the positioning angle to the required measuring angle with the help of the magnetic level indicator.
6. Re-test with a locator. If a small deviation is found, just fine-tune the bottom of the car. (Generally, a little deviation will not cause positioning failure). Instructions:Dụng cụ đo góc bánh xe Z2N9 C6M0
1. Remove the four-wheel positioning sensor (clamp) and remove the tire;
2. Carefully suck the magnetic level on the side of the brake wheel;
3. Adjust the level to zero;
4. Install the required positioning special parts;
5. Use special tools and adjust the positioning angle to the required measuring angle with the help of the magnetic level indicator.
6. Re-test with a locator. If a small deviation is found, just fine-tune the bottom of the car. (Generally, a small deviation will not cause positioning failure)
Specifications:Dụng cụ đo góc bánh xe Z2N9 C6M0
 Material: steel
 Blister Number: 5
 Detect range: 1.5mm
 Detect Accuracy: 99
 Color: Silver (as pictures show)
 Dimensions: approx.12.4x3x2cm
Package contents:Dụng cụ đo góc bánh xe Z2N9 C6M0
1 * Magnetic Gauge Tool
Have a nice day!

Welcome to visit.Hope you have a nice day!

we will be ready to reply you ASAP.

Dụng cụ đo góc bánh xe Z2N9 C6M0
If you need more this item ,you can contact us.we will give you our best price. Leave your message!

Chi Tiết Dụng cụ đo góc bánh xe Z2N9 C6M0