Dụng cụ bút vệ sinh dạng nhấp 2.5mm làm sạch sợi cáp quang chuyên dụng tại Lotte Market

Giới thiệu Dụng cụ bút vệ sinh dạng nhấp 2.5mm làm sạch sợi cáp quang chuyên dụng tại Lotte Market

Description:

Fiber Optic BOB-Mini is designed to specially work well with the SC, FC, and ST connectors, this instrument cleans the ferrule end faces removing dust, oil, and other debris without nicking or scratching the end face.

Features:

. Easy pushing motion engages connector and initiates cleaner
. Disposable with 800+ cleanings per unit
. Made from anti static resin
. Cleaning micro fibers are densely stranded and debris free
. Extendable tip reaches recessed connectors
. Cleaning system rotates 180 for a full sweep
. Audible click when engaged

Applications:

1. Fiber network panels and assemblies
2. Outdoor FTTX applications
3. Cable assembly production facility
4. Testing laboratories
5. Server, switches, routers and OADMS with SC and LC interface

Package:

1 x 2.5mm Pen Type Fiber Optic Cleaner

Why Should We Clean the Connectors?
Research has shown over 85% of fiber optic network failures in data centers, campus, and other optical communication facilities are caused by contamination on the optical connector end face.
For best optical performance, it is imperative that all optical fiber connections are clean and free of contaminants. Fiber optic cleaning products is being highly recommended as a kind of very important tool for electrical manufactures. One of the most basic and important procedures for the maintenance of fiber optic systems is to clean the fiber optic equipment.
The fiber optic connector cleaner is designed to effectively and quickly clean connector endfaces, both the unmated patchcord and through the adapter. It cleans the ferrule end faces removing dust, oil, and other debris without nicking or scratching the end face. It is very easy to use and suitable for SC/ST/FC connectors.
Fiber Optic Products Maintenance

Fiber Optic Connector Inspection Steps:
Clean:Clean the end face of all components in each mated pair to avoid contamination before connection.
Inspect:Inspect each mated pair with a Fiber Inspection Microscope to verify end face cleanliness. If contamination is present, re-clean and re-inspect each mated pair. (Warning: Invisible laser radiation might be emitted from disconnected fibers or connectors. Do not stare into beams or view directly with optical instruments.)
Connect:Make each connection immediately after successful visual inspection of the mated pair.
RE-Clean:If you disconnect the connections, please re-clean and re-inspect all components before you connect.