Notice: file_put_contents(): write of 2708 bytes failed with errno=28 No space left on device in /home/libs.com/public_html/libs_chung/v4/_product.php on line 111

Warning: file_put_contents(): Only -1 of 2708 bytes written, possibly out of free disk space in /home/libs.com/public_html/libs_chung/v4/_product.php on line 111
Động Cơ Servo Pca9685 16 Kênh 12 Bit I2C Pwm Cho Raspberry (Sunshine55)

Động Cơ Servo Pca9685 16 Kênh 12 Bit I2C Pwm Cho Raspberry (Sunshine55) tại Lotte Market

Thương hiệu: | Xem thêm Điện Thoại & Phụ Kiện Thương hiệu  

Mô tả ngắn về Động Cơ Servo Pca9685 16 Kênh 12 Bit I2C Pwm Cho Raspberry (Sunshine55) tại Lotte Market

This PCA9685 i2c-controlled 16-Channel 12-Bit PWM Servo Driver can help a lot when there are insufficient PWM output pins for the MCU in your project. Using only two pins, control 16 free-running independently-addressable PWM outputs! You can even chain up 62 breakouts to control up to 992 PWM outputs. i2c-controlled PWM driver with a built-in clock. It is completely free
: Còn hàng
: Shopee
96.400đ 96.400đ
** Quét mã QR bằng Zalo để mua trên điện thoại

Giới thiệu Động Cơ Servo Pca9685 16 Kênh 12 Bit I2C Pwm Cho Raspberry (Sunshine55) tại Lotte Market

This PCA9685 i2c-controlled 16-Channel 12-Bit PWM Servo Driver can help a lot when there are insufficient PWM output pins for the MCU in your project. Make a robot, hexapod walker, or drive multiple LEDs with precise PWM control.Động Cơ Servo Pca9685 16 Kênh 12 Bit I2C Pwm Cho Raspberry (Sunshine55)
Using only two pins, control 16 free-running independently-addressable PWM outputs! You can even chain up 62 breakouts to control up to 992 PWM outputs. Simply enable the I2C communication between the MCU and the PCA9685 16-channel 12-bit PWM driver, so as to control multiple servos simultaneously.
Features:
i2c-controlled PWM driver with a built-in clock. That means that you do not need to continuously send it a signal, tying up your microcontroller. It is completely free running!
5V compliant, you can control it from a 3.3V microcontroller and still safely drive up to 6V outputs (this is good for when you want to control white or blue LEDs with 3.4+ forward voltages)
6 address select pins so you can wire up to 62 of these on a single i2c bus, a total of 992 outputsĐộng Cơ Servo Pca9685 16 Kênh 12 Bit I2C Pwm Cho Raspberry (Sunshine55)
Adjustable frequency PWM up to about 1.6 KHz
12-bit resolution for each output. For servos, that means about 4us resolution at 60Hz update rate
Configurable push-pull or open-drain output
Output enable pin to quickly disable all the outputs
Terminal block for power input (or use the 0.1” breakout pins on the side)Động Cơ Servo Pca9685 16 Kênh 12 Bit I2C Pwm Cho Raspberry (Sunshine55)
Reverse polarity protection on the terminal block input
Green power-on LED
3 pin connectors in groups of 4 so you can plug in 16 servos at once (Servo plugs are slightly wider than 0.1” so you can only stack 4 next to each other on 0.1” header)
Chainable design
220 Ohm series resistors on all the output lines to protect them, and to make driving LEDs trivialĐộng Cơ Servo Pca9685 16 Kênh 12 Bit I2C Pwm Cho Raspberry (Sunshine55)
Solder jumpers for the 6 address select pins
Dimensions: 60mm x 24mm x 12mm (2.4 x 1 x 0.5 inches) approx.
Package contents:1 x PCA9685 16 Channel 12-bit PWM Servo Motor Driver I2C Module

Chi Tiết Động Cơ Servo Pca9685 16 Kênh 12 Bit I2C Pwm Cho Raspberry (Sunshine55)