Động cơ bước 4 lá 17Hs08-1004S 20Mm 1A 13Ncm(18.4Oz.In) 42 động cơ Nema17 cho máy in 3D Xzy tại Lotte Market
Thương hiệu: | Xem thêm Máy In 3D Thương hiệuMô tả ngắn về Động cơ bước 4 lá 17Hs08-1004S 20Mm 1A 13Ncm(18.4Oz.In) 42 động cơ Nema17 cho máy in 3D Xzy tại Lotte Market
Short Height. FOR NEMA 17 bipolar 1. 65 inchx0. 8 deg. Rated current 1. This is Short Height FOR Bipolar Nema 17 stepper motor with 1. step angle (200 steps/revolution). Color: sier. Electrical Specification:. Motor Type: Bipolar Stepper. 8 deg. Rated Current/phase: 1. Inductance: 4. Frame Size: 42 x 42mm. Shaft Diameter: 5mm. D-cut Length: 16. Lead Length: 400mm. Black(A+),: Còn hàng
** Quét mã QR bằng Zalo để mua trên điện thoại
Giới thiệu Động cơ bước 4 lá 17Hs08-1004S 20Mm 1A 13Ncm(18.4Oz.In) 42 động cơ Nema17 cho máy in 3D Xzy tại Lotte Market
Short Height13Ncm(18.4oz.in) holding torque
FOR NEMA 17 bipolar 1.65 inchx1.65 inchx0.79 inch 4-wire
1.8 deg. step angle(200 steps/rev)
Rated current 1.0A & resistance 3.5ohms
This is Short Height FOR Bipolar Nema 17 stepper motor with 1.8 deg. step angle (200 steps/revolution).
Each phase draws current 1A, allowing for a holding torque of 13Ncm(18.4oz.in).
Color: sier
material: metal
Electrical Specification:
Manufacturer Part Number: 17HS08-1004S
Motor Type: Bipolar Stepper
Step Angle: 1.8 deg.
Holding Torque: 13Ncm(18.4oz.in)
Rated Current/phase: 1.0A
Phase Resistance: 3.5ohms
Inductance: 4.5mH+/-20%(1KHz)
Physical Specification:
Frame Size: 42 x 42mm
Body Length: 20mm
Shaft Diameter: 5mm
Shaft Length: 20mm
D-cut Length: 16.5mm
Number of Leads: 4
Lead Length: 400mm
Weight: 140g
Connection:
Black(A+), Green(A-), Red(B+), Blue(B-)
Warning:
Make sure the motor connect to a constant current or chopper drive controller before you test motor.
Connecting the motor directly to a power supply will destroy the motor.
Package Contents:1* stepper motorOnly the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.