Điều khiển từ xa không dây 4 nút 1KM 315/433MHz tại Lotte Market

Giới thiệu Điều khiển từ xa không dây 4 nút 1KM 315/433MHz tại Lotte Market

#1KM #315/433MHz #Wireless #4 #Keys #Copy #Cloning #Remote #Controller #Duplicator #Garage
1KM 315/433MHz Wireless 4 Keys Copy Cloning Remote Controller Duplicator Garage
Specifications:
Material: ABS
Size: approx. 150 x 42 x 25mm / 5.91 x 1.65 x 0.98”

Rated voltage: DC 9V ( 6F22 Battery) ( Battery not included)
Rated current: 10mA
Installation: Wireless
Corresponding frequency: 315MHz / 433MHz (Optional)

Modulation: ASK (amplitude modulation)
Wireless transmitting distance: 500-1000m (open space)
Scope: Garage doors, alarm, automatic doors, shutter doors, and so on
Cloning chip types:

2260(PT2260,SC2260,LX2260,HX2260); 2262,(PT2262,SC2262,LX2262,HS2262,HX2262),PT2264,PT2240(LX2240),1527( EV1527,HS1527,HX1527 ),FP527,CS5211,SMC918,SMC926,AX5026,AX5326-3,AX5326-4,HT600,HT680,HT6207,HT6010,HT6012,HT6013,HT6014,HT12D, HT46F49E, PIC16F629,PIC16F630 and so on. Different chip manufacturers have different prefixes chip model, as long as the digital portion of the chip can be the same model.
Note: We usually do not recommend copying a rolling code chip, because there are many uncertainties when copying a rolling code chip. When copying a rolling code chip remote control, it is not possible to determine whether the original remote control chip is an encryption chip.

Use steps:

1. Clear code: two fingers at the same time hold the unlock key and lock key; the LED light rapidly flashes 3 times in about 2 seconds; let one of the fingers go (the other hand cannot let go), and then use the loose finger to quickly click three times on the loose button until the LED light flashes quickly; the two fingers can release; then press any one key of the remote control; when LED light goes off, it means clear code is successful(four keys all empty); if after you press any button of the remote control, the light is still on, it indicates that the original code has not been cleared successfully. You need to re-clear, and only successfully clearing the code can cloning be successful. You can repeatedly clear and clone the code.
2. Copy: left hand taking the original remote control, right hand taking our cloned remote control and keep two remote control as close as possible; press the first keys of two remote controls at the same time; in about 2 seconds, the LED light will flash quickly 2 times; after one second, the indicator light keeps flashing and let go of your fingers; and then press the key after successful study, the light keeps on, which means that the first key code on original remote control has been copied to the other remote control; the same method can be used in turn on the second key, the third key... If the copy is successful, the remote control function is the same as the original matching remote control.

Package Includes:

1 x Wireless Remote Control