Điều khiển từ xa 433MHz cho cửa gara tại Lotte Market

Thương hiệu: | Xem thêm Remote Tivi Thương hiệu  

Mô tả ngắn về Điều khiển từ xa 433MHz cho cửa gara tại Lotte Market

433MHz Remote Control Duplicator for Car Key Gate Garage Door Opener 4 Channel Auto Cloning RF Remote Control. Product size: 60*35*10mm/2. Rated voltage: 12V. Installation method: wireless. Wireless transmission distance: 50-100m (open space). Copy instructions:. 2260 (all manufacturers), 2262 (all manufacturers), PT2264, 5326 (all manufacturers), SC5262, HT600, HT680, HT6207, HT6010, HT6012, HT6014, SMC918 series, 527 (all manufacturers), 1527 (all manufacturers),
: Còn hàng
: Shopee
68.400đ 68.400đ
** Quét mã QR bằng Zalo để mua trên điện thoại

Giới thiệu Điều khiển từ xa 433MHz cho cửa gara tại Lotte Market

433MHz Remote Control Duplicator for Car Key Gate Garage Door Opener 4 Channel Auto Cloning RF Remote ControlĐiều khiển từ xa 433MHz cho cửa gara<br />
Specification:
Product material: ABS
Product size: 60*35*10mm/2.36*1.38*0.39”
Product color: Purple + Grey
Rated voltage: 12VĐiều khiển từ xa 433MHz cho cửa gara<br />
Rated current: 10mA
Installation method: wireless
Corresponding frequency: 433MHz
Wireless transmission distance: 50-100m (open space)
Scope of application: garage doors, alarms, automatic doors, rolling shutters, etc.Điều khiển từ xa 433MHz cho cửa gara<br />

Copy instructions:
1. Chips that can be copied:
2260 (all manufacturers), 2262 (all manufacturers), PT2264, 5326 (all manufacturers), SC5262, HT600, HT680, HT6207, HT6010, HT6012, HT6014, SMC918 series, 527 (all manufacturers), 1527 (all manufacturers), 2240 (all manufacturers), HCS101, HCS200\HCS201 (part of the code), HCS300\HCS301 (part of the code), part of the single-chip...
2. Clear code method:Điều khiển từ xa 433MHz cho cửa gara<br />
Press and hold the unlock and lock buttons at the same time (some shells have two up and down buttons), the LED indicator flashes three times, release any one of the pressed buttons, and the other is not released, click the released button three times, LED The indicator light enters a fast flashing state. At this time, all data in the memory is cleared. After the data is cleared, the remote control will not light up no matter which button is pressed.
3. Copy code method:
Hold the original remote control in one hand and the copy remote control in the other. Keep the two remote controllers as close as possible (ideally place the two remote controls close to each other on the desktop) and press the desired copy keys , The LED indicator flashes quickly three times and then flashes quickly, the copy is successful, and the other buttons operate in the same way. Some remote controllers have low transmitting power, so the original remote control and the copy remote control should be operated back-to-back. If there is interference in some operating environments, you should avoid the interference operation. If the copy is not easy to use, copy it again after clearing the code.
4. Features of the new copy remote control:
The four buttons can respectively copy four different types of chips, that is, a remote control can operate four different types of facilities. The frequency ranges from 270MHz to 434MHZ and more than ten frequencies. The data copy speed is fast, not easy to lose codes, and the distance is long.Điều khiển từ xa 433MHz cho cửa gara<br />
5. Can be used for common garage doors, retractable doors, barriers, parking locks, anti-theft devices.

Note:
1. There may be slight size deviations due to manual measurement, different measuring methods and tools.
2. The picture may not reflect the actual color of the item because of different photographing light, angle and display monitor.Điều khiển từ xa 433MHz cho cửa gara<br />


Included:

1 X Remote Control DuplicatorĐiều khiển từ xa 433MHz cho cửa gara<br />

Chi Tiết Điều khiển từ xa 433MHz cho cửa gara