Đèn Led Cảm Biến Gắn Tường Sử Dụng Năng Lượng Mặt Trời 141 Led Ip65 Ito tại Lotte Market

Giới thiệu Đèn Led Cảm Biến Gắn Tường Sử Dụng Năng Lượng Mặt Trời 141 Led Ip65 Ito tại Lotte Market

Package Included:
1* Solar Wall Light
1* Manual
3* Screws

Specifications:
Name:Solar sensor Light
Material: ABS
Light Source: 141 LEDs
Solar Panel: 5.5V/1.6W
Battery: 2400mAh 3.7V
Induction Distance: 3-5m
Working Mode: Mode1, Mode2, Mode3
Waterproof: IP65

Light Mode:
1. Press the switch button for the first time to enter Mode 1: When people come, the light turns on at 100% brightness. The light turns off 20 seconds after people leave.
2. Press the switch button for the second time to enter Mode 2: When people come, the light is at 100% brightness. The light is always on at 10% brightness 20 seconds after people leave.
3. Press the switch button for the third time to enter Mode 3: The light stays on at 30% brightness at night without infrared induction.


- Features:
1. Higher-capacity batteries & unique low light mode make it last longer.
2. Auto on/off and lighting mode switch.
3. Easy to use and maintain with the simple structure
- Wide Application:
Outdoor solar lights, suitable for gardens, swimming pools, fences, courtyards, driveways, stairs, exterior walls, etc., heat, weatherproof, no need to worry about outdoor damage.
- Automatically Turn on:
The PIR motion sensor can scan the people that continuously moves within the detection range. When someone appears in the area, the light will automatically turn on.
- Solar Light:
The solar light needs 6-8 hours of sunlight charging during the day and 8-10 hours of normal operation at night. No wires are needed, providing you with an economical, low-carbon and environmentally friendly life.
- Fast Charging:
Solar panel charging depends on the duration of light and weather conditions. The stronger the sun, the shorter the charging time. On cloudy or rainy days, battery efficiency is reduced, resulting in shorter lighting times.


Notes:
Troubleshooting: If the light does not work, please follow these steps:
1. Check the switch and make sure it's set to ON position.
2. Check the place you mount the device and make sure the solar panel is not in shade during the daytime.
3. Check and make sure the battery has been charged, it needs a few hours before it's sufficiently recharged.