Dc-Dc Low Voltage Module 4-32v To 1.2-32v 10A tại Lotte Market

Giới thiệu Dc-Dc Low Voltage Module 4-32v To 1.2-32v 10A tại Lotte Market

Module parameters:
Module name: 10A synchronous rectification buck constant voltage constant current
Module nature: non-isolated buck module (BUCK) synchronous rectification
Input voltage: 4-32V (limit 36V), please keep the voltage margin.
The output voltage:
1.2-32V continuously adjustable (default output 5V, if you need other voltage, please explain to the shopkeeper.)
1.2-32V fixed output (please explain the required voltage to the shopkeeper)
The default delivery is adjustable output, (adjusted to 5V/6A when shipped)
Input and output small differential pressure: 1V
Output current: 0.4-10A Natural heat dissipation within 6A for a long time, the temperature does not exceed 60 degrees. Please use derating when the ambient temperature is high.
Output constant current range: 0.3-10A
Working temperature: -40~+85 degrees
Working frequency: 150KHz
Conversion efficiency: 98% (efficiency is related to input, output voltage, current, pressure drop)
Short circuit protection: yes (limit current to current constant current value)
Over-temperature protection: Yes (automatically reduce output current after over-temperature)
Input reverse connection protection: none (please insert a diode in the input if necessary)
Output anti-reverse protection: None (If necessary, please connect a diode in the output. For charging applications, please add an anti-reverse diode between the output of the module and the battery, otherwise the module will be damaged.)
Installation method: 4 3mm screws
Wiring method: terminal block, solder-free, IN is input, OUT is output, and the module with shell is solder wire output.
Module size: length 60mm width 26mm height 20mm

Application range:
1. DIY a regulated power supply with constant current function, not afraid of short circuit during use, can protect the load.
2. Power your electronic equipment.
3. To charge various batteries, set the charging voltage and charging current according to batteries with different voltages and capacities.
4. Charge all kinds of batteries with solar panel power supply, with constant current function, which can prevent the battery from overcharging and effectively protect the battery.
5. Drive high-power LED, which can be combined in series and parallel freely.
6. As a car power supply, power your mobile phone, laptop or various digital products.

Set the output voltage: According to the float voltage value of the battery you want to charge, or the voltage value of the series and parallel LEDs, adjust the constant voltage potentiometer (CV) to set the output voltage to the required voltage. (Without load)
Set the constant current value: adjust the CC potentiometer counterclockwise for about 20 turns, use a multimeter to short-circuit the 20A current output, and adjust the CC potentiometer to the current value you need to set.

note:
When the constant current is set, the voltage should be higher than 1.2V, otherwise the constant current function will be invalid.