Notice: file_put_contents(): write of 3320 bytes failed with errno=28 No space left on device in /home/libs.com/public_html/libs_chung/v4/_product.php on line 111

Warning: file_put_contents(): Only -1 of 3320 bytes written, possibly out of free disk space in /home/libs.com/public_html/libs_chung/v4/_product.php on line 111
Dây cáp chẩn đoán lỗi ELM327 USB FF2 có công tắc - Lotte Market

Dây cáp chẩn đoán lỗi ELM327 USB FF2 có công tắc tại Lotte Market

Thương hiệu: | Xem thêm Dụng cụ sửa chữa Thương hiệu  

Mô tả ngắn về Dây cáp chẩn đoán lỗi ELM327 USB FF2 có công tắc tại Lotte Market

Technical Details:. Manufactured ification to include a switch to connect to different CAN buses. Compatible with software venders; Elmconfig, FF2 and FoCCCus, plus more. Drivers and instructions included. Designed for communicating with Ford, Mazda, Lincoln and Mercury vehicles. OBD2 scanners. Basic Features:. Change car configuration data. Services procedures. Pin Configurations:. Switch position two: MS CAN - Occupies pins 3 and
: Còn hàng
: Shopee
203.000đ 213.000đ
** Quét mã QR bằng Zalo để mua trên điện thoại

Giới thiệu Dây cáp chẩn đoán lỗi ELM327 USB FF2 có công tắc tại Lotte Market

Technical Details:Dây cáp chẩn đoán lỗi ELM327 USB FF2 có công tắc<br />
1.Latest ELM327 version for greater ford compatibility.2.Manufactured ification to include a switch to connect to different CAN buses.3.Designed for software
4.Compatible with software venders; Elmconfig, FF2 and FoCCCus, plus more.5.MS CAN bus and HS CAN bus support.6.Drivers and instructions included
Introduction:One ELM327 OBDII OBD2 USB with switch. Designed for communicating with Ford, Mazda, Lincoln and Mercury vehicles. With this cable and the one of the supported software vendors you can detected ules which are not visible for regular
OBD2 scanners. This includes showing you trouble codes, PIDs, running tests and services procedures which are never displayed by other OBD2 scanners and a standard ELM327.
Basic Features:
Reset fault /trouble codes / parameter ids (PIDs)
Change car configuration data
Run testsDây cáp chẩn đoán lỗi ELM327 USB FF2 có công tắc<br />
Services procedures
Program certain els
Pin Configurations:
Switch position one: HS CAN - Occupies pins 6 and 14
Switch position two: MS CAN - Occupies pins 3 and 11
Supported Software:
Elmconfig
FoCCCusDây cáp chẩn đoán lỗi ELM327 USB FF2 có công tắc<br />
FF2
Plus more
ified EML:
Please note that many Ford and Mazda els (approximately since 2003-2004) are equipped with MS CAN bus, in addition to the regular HS CAN bus. In contrast to HS CAN bus, MS CAN bus is not supported by the stock ELM327, because MS CAN
is a manufacturer-specific solution and located on non-OBD2 pins. This ELM327 has been ified to allow it to implement the MS CAN bus.
ELM327 supports HS CAN from the stock, because For.d HS CAN completely matches to the OBD2 standards. It occupies pins 6 and 14. MS CAN bus occupies pins 3 and 11.
Supported Vehicles:
All For.d, Mazda, Lincoln, Mercury vehicles that can be addressed using an ELM via an OBDII connector.Dây cáp chẩn đoán lỗi ELM327 USB FF2 có công tắc<br />
Supported Protocols:
FOR.D HS CAN
FOR.D MS CAN
Colour: Black
Material: plastic + metal

Package Contents:
1 x ELM327 Diagnostic InterfaceDây cáp chẩn đoán lỗi ELM327 USB FF2 có công tắc<br />
1 x CD
Other Details:
Cables fully tested on supported el before shipping.
No responsibility can be acceptedfor any damage caused by the lead.
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.

Chi Tiết Dây cáp chẩn đoán lỗi ELM327 USB FF2 có công tắc