Đầu dò định tuyến DUJIA Grbl Mach3 CNC Z-Axis Mach3 tại Lotte Market

Giới thiệu Đầu dò định tuyến DUJIA Grbl Mach3 CNC Z-Axis Mach3 tại Lotte Market

The function of the tool setting instrument The measurement and compensation of the tool offset value in five directions can effectively eliminate the error and inefficiency caused by manual tool setting. No matter what kind of cutting tool is used for workpiece contour turning or milling, all tool tip points or tool axis lines involved in cutting must be adjusted or compensated so that they are accurately located at the same theoretical point or axis of the workpiece coordinate system on-line




How to use:
1.Alligator clip is fixed on the cutter
2.DuPont port has been connected to the control board (A5 interface on the 3018pro control board)
3.Place (plastic + aluminum plate) under the tool
【GRBL Z-probe】CNC Router Tool Setting Automatic Tool Setter. Thickness: 1.6mm (±0.03mm)
【Tool Setting Function】 It can accurately locate the working surface, and is most suitable for PCB engraving.
【Easy to Use】You can refer to our video to understand how to use it correctly.
【Probe Command】Please change the Probe command in Grbl to: G91G21G38.2Z-30F100;G92Z1.6;G0Z5F10
What does G91G21G38.2Z-30F100;G92Z1.6;G0Z5F10 mean ：

G91 : Use relative coordinate mode

G21 : Use mm unit

G38.2 : Tool setting instruction

Z-30 : The Z axis moves 30mm in the negative direction, if it touches the tool setter, it will stop and set this point as the origin

F100 : the speed of the Z-axis when it is running

; : Newline, next instruction

G92 : Coordinate offset, because the tool setter has a thickness, in order to remove the thickness of the tool setter, you need to set the offset

Z1.6 : Z-axis offset 1.6, 1.6 is the thickness of the tool setter, which is subject to the actual measured thickness of the tool setter

; : Newline, next instruction

G0 : fast moving

Z5 : The Z axis moves to the position of coordinate 5, which is convenient for taking out the tool setter

F10 : Z-axis upward movement speed







Package include :

1* Clamp

1* Wire

1* Probe board