Dajrrhd AC 100-220V Delay Timing Relay Module Timer Board 4 Gear Time Range tại Lotte Market

Giới thiệu Dajrrhd AC 100-220V Delay Timing Relay Module Timer Board 4 Gear Time Range tại Lotte Market

Feature:
1. With transformer step-down, it has high stability
2. 2-digit digital tube display, the set time is displayed during setup, and the remaining time is dynamically displayed during the countdown
3. 220V direct input, direct output, connect to the power load to work
4. The external contact is activated, and the timing is started by shorting the self-reset button. It is also possible to short the triggers together and start counting down when power is applied.
5. Precise delay using single chip microcomputer

Specification:
Item Type: Module
Working Voltage: DC 220V 50/60Hz
Power Consumption: Up to 1.5W
Load Capacity: 10A 250VAC
Trigger Mode: Short Contact Trigger
Trigger Response Speed: 10 Milliseconds
Delay Range: 1-99 Seconds
Life: 100,000 Movements

Package List:
1 x Module 

Note:
1. The module is a non-isolated capacitor step-down mode, so all positions on the board are charged and the human body is inaccessible. Safety protection should be carried out in accordance with relevant standards during installation.
2. The trigger terminal can only be connected to the passive switch, not to the voltage signal. Doing so can damage the module.
3. When the number jumps at the critical position, it can be finely solved.
4. When the resistance load is connected, no special treatment is needed; when the capacitive load is connected, the relay module is easily damaged by electric power. It is recommended to use the AC contactor derated or the contact current of the motor should be considered within 10A.