Dajrrhd 2 Pcs Side Cutter Presser Foot Professional Sturdy Durable Sewing for Low Shank Machines tại Lotte Market

Giới thiệu Dajrrhd 2 Pcs Side Cutter Presser Foot Professional Sturdy Durable Sewing for Low Shank Machines tại Lotte Market

Feature:
1. Side Cutter Presser Foot: Side cutter attachment trims fabric when seams are sewn, and seams and seam finishes are sewn at the same time.
2. Simple Operation: Easy to use, easy to sew die cast stitches, lock the thread on the edge of the fabric, and align perfectly with the edge.
3. Incisive Cutting: The cut is incisive, can be cut along the line on the fabric, and can be attached to the machine by simply changing the presser foot when sewing.
4. Professional Finish: With fine workmanship, the side cutter presser foot gives the garment a professional finish.
5. Applicable Scene: Compatible with most low shank sewing machines, it is strong, durable and has a long service life.
Specification:
Item Type: Side Cutter Presser Foot
Product Material: Plastic, Stainless Steel
Specifications:
1 Set
Product Use: Household Multifunctional Sewing Machine for Trimming, Overlocking
Applicable: Suitable for All Low Shank Sewing Machines
Package List:
2 x
Side Cutter Presser Foot2 x User Manual
How to Use
1. Raise the presser foot lifter and lift the presser foot lever
2. Remove the presser foot holder screw by unscrewing (counterclockwise) the connecting lever.
3. Mount the side cutter on the machine as follows: The arm (a) should be mounted above the needle screw and clamp (b). Slide the plastic fixing head (c) from left to right so that it fits onto the presser foot bar. Lower the presser foot lever. Replace the push rod attachment screw and tighten it clockwise. Make sure that both the needle screw and the pressure bar set screw are tightened.
4. Cut off 2‑3 cm from the edge of the fabric.
5. Place the fabric on the guide plate (d) and push the left side of the fabric below the presser foot (e). Thread the needle, pull the upper and lower threads back under the presser foot, and place it in the feed direction. Run the machine slowly and start sewing from under the needle. Adjust the stitch length of the machine. You can enjoy a variety of frills to your liking. For very thin fabrics, loosen the tension of the upper and lower threads and the pressure of the presser foot bar, and use your fingers to guide the fabric not to slip.