Chìa khóa không dây sao chép tín hiệu cho điều khiển cửa nhà xe 433MHz tại Lotte Market

Giới thiệu Chìa khóa không dây sao chép tín hiệu cho điều khiển cửa nhà xe 433MHz tại Lotte Market

Description:
This new self-contained copy remote can learn fixed code remotes.
Compatible with remote control codes up to 80 digits: 2262, 2260, 5026, 5326, 5326-3, FP527, PT2240, EV1527, HT6014, HT12E, HT640, HT680, PLC168, SMC series 9XX, PT2292, 12L-4SC, HT6026, Remote control such as UM3750AM is reproduced and added.
One-to-one key copy, each key password is saved separately, and can be used repeatedly for one million times.
Strong privacy, especially suitable for home remote control copy.

Specification:
Working voltage: 12V
Working current: ≤12mA
Oscillation resistance: according to customer requirements
Remote control distance: 50-100m (in the open environment, the sensitivity of the receiving device is -100dbm)
Modulation method: ASK amplitude modulation
Number of buttons: 4
Copy chip type reference: learning code (HS1527, EV1527, HT6P20B, etc.), fixed code (HS2260, HS2260, PT2260, SC2262, etc.)
Copy method:
1. Clear code: Before copying, clear the test code copied from the factory production. Press the remote control at the same time as shown in the figure.
The two buttons do not break up. When the button is pressed for about 3 seconds, the lamp flashes to a slow flash and then releases the hand, and then presses any button individually.
The light does not illuminate, indicating that the clearing is successful.
2. Remote control copy method: press and hold the copy remote control to copy the button without releasing the hand, while holding down the copy to be copied
The remote control corresponds to the button to be copied, the two remote controls are close, about 3 seconds, the copy remote control light is never bright.
To slow flashing and then flashing, at this time let go, try again by pressing this button, the light will be on, indicating that the copy is copied successfully.
The same method is used for other key copies.
3 remote control recovery function: If you accidentally erase the code, press the two buttons on the top and bottom for 2 seconds to flash, indicating
The internal code recovery was successful.

Package Includes:
1 piece remote control