Chìa khóa điều khiển từ xa 433mhz thông dụng cho gara xe hơi tại Lotte Market
Thương hiệu: | Xem thêm Khóa & Bảo mật Thương hiệuMô tả ngắn về Chìa khóa điều khiển từ xa 433mhz thông dụng cho gara xe hơi tại Lotte Market
4-key Wireless Remote Control for Cars, Car Sunroofs, Garage Doors, Gate Doors, Alarm Systems, Heating Systems, Home automation e. This is a fixed frequency remote cloner 433mhz for copying 99. Decoder IC:. PLEASE NOTE: Fixed code and partial rolling code can be cloned. Remote Distance: 100m(open space, sensitivity of the receiver is -100dbm). Working Current: ≤12mA. Button: 4 Buttons. Material:: Còn hàng
** Quét mã QR bằng Zalo để mua trên điện thoại
Giới thiệu Chìa khóa điều khiển từ xa 433mhz thông dụng cho gara xe hơi tại Lotte Market
Features:
4-key Wireless Remote Control for Cars, Car Sunroofs, Garage Doors, Gate Doors, Alarm Systems, Heating Systems, Home automation e.g. Lighting and etc.
This is a fixed frequency remote cloner 433mhz for copying 99.99% common fixed & learning code remote controls.
Decoder IC:
PT2260, PT2262, PT2264, PT1527, PT527, PT1587, PT1827, HS2260, HS2262, HS2264, HS2240, HS1527, HS527, HS1587, HS1827, RT2260, RT2262, RT2264, RT2240, RT1527, SC527, SC1587, SC1827, SC2260, SC2262, SC2264, SC2240, SC1527, SC527, SC1587, SC1827, EV2262, EV2264, EV2240, EV1527
PLEASE NOTE: Fixed code and partial rolling code can be cloned.
Specification:
Working Frequency: 433MHz
Remote Distance: 100m(open space, sensitivity of the receiver is -100dbm)
Working Voltage: DC 6v
Working Current: ≤12mA
Oscillation Mode: SAW Resonance
Button: 4 Buttons
Power Supply: 2x 3V CR2016 Battery(included)
Material: Plastic
Product Size: 60*34*10mm
Color: Blue/Green/Red/Yellow(Optional)
How to Program?
Step-1 Clear the history code from duplicator
1. Press button A and B continuously until LED flash 3 times
2. Release button B (Keep pressing button A),and press button B Slowly until LED flashes
3. Release button A, finish code clearance.
If code clearance done properly, short press any button. Light won't flash at all.
If light flash when short press any button clearance process done wrong. Please repeat clearance process again.
Step-2 Copy code from original transmitter
Place the cloner remote and the original remote close together side by side. Make sure they are touching.
1. Simultaneously press the first button on your original remote and that of the buttons on the clone remote and hold until the LED on the clone remote flashes is always on.
2. Release both buttons. Programming is successful. Copy other buttons in same way.
Package Includes:
1 x 4-Key Remote Control (with battery)