Car/Motorbike Body Paintless Repair Dent T Bar Hand Puller Lifter 18 Tabs Removal Tool Kit tại Lotte Market

Giới thiệu Car/Motorbike Body Paintless Repair Dent T Bar Hand Puller Lifter 18 Tabs Removal Tool Kit tại Lotte Market

- How to use this paintless dent repair kits:

- the dent with a clean wet cloth;

- the glue stick into the glue gun,pull the to let the glue stick enter into the glue gun, connect the power source and preheat for 5 minutes;

- a proper drawing gasket. Large dent requires a large drawing gasket. (Note: The larger the drawing gasket is, the larger the drawing force is);

- 4. Pull the and apply the drawing gasket with extruded glue (The 4 holes of gasket should be applied with hot melt glue);

- 5. Fast place the drawing gasket with hot melt glue at the center of dent, press lightly until the glue cures and adheres (Let the glue cool for about 8 minutes. The cooling time should be less than 10 minutes and should be shorter slightly in winter);

- 6. Align the T-shaped repairer and press the drawing gasket with hot melt glue, pull the sliding rod backwards to pull up the dent;

- 7. Check with a Line board. If dent still exists, knock it slightly with a flattening hammer or pen;

- 8. Clean the repaired place with a clean wet cloth.

- Package Includes:

- 1 Piece T-Bar

- 18 Pieces Glue Pads

Giá sản phẩm trên Tiki đã bao gồm thuế theo luật hiện hành. Bên cạnh đó, tuỳ vào loại sản phẩm, hình thức và địa chỉ giao hàng mà có thể phát sinh thêm chi phí khác như phí vận chuyển, phụ phí hàng cồng kềnh, thuế nhập khẩu (đối với đơn hàng giao từ nước ngoài có giá trị trên 1 triệu đồng).....