Camera chiếu hậu cho xe Toyota Hilux 2010-2017 tại Lotte Market
Thương hiệu: | Xem thêm Thiết bị điện tử Thương hiệuMô tả ngắn về Camera chiếu hậu cho xe Toyota Hilux 2010-2017 tại Lotte Market
support night vision. Support NTSC OR PAL Video system. Applicable to variety of Vehicles: car, truck, RV, mini-van etc. 6m Video cable. Install tips. Fix the camera to where the stock license plate light was. Connect the power of the camera to your reverse lights - red wire to positive and black wire to negative. Connect the extension cord to: Còn hàng
** Quét mã QR bằng Zalo để mua trên điện thoại
Giới thiệu Camera chiếu hậu cho xe Toyota Hilux 2010-2017 tại Lotte Market
Weatherproof.support night vision.CCD imaging sensor.Support NTSC OR PAL Video system.High-definition and wide viewing angle.
Applicable to variety of Vehicles: car, truck, RV, mini-van etc.Easy to install, you can install the monitor via mount holder or universal bracket.
6m Video cable.Can help avoid incidents and accidents abrasion well.
Install tips
Take out your license plate light at the back of your car.
Fix the camera to where the stock license plate light was.
Connect the built-in license plate light of the camera to where the stock license plate light was connected to get the power
Connect the power of the camera to your reverse lights - red wire to positive and black wire to negative.
Connect the video cable of the camera to the extension cord.
Connect the extension cord to your car monitor.
You will see the images when your car is in reverse shift.
Specifications:
Image sensor: Color 1/3 inch Sensor CCD
Resolution: 752(H)x582(V) Pixel
Horizontal resolution: 520 TV Lines
Viewing angle: 170 degrees
Power supply: DC 12V
For The Following Vehicles:For Toyota Hilux 2010-2017
Colour:Black
Material:ABS
Package Contents:
1x Car Rear View Camera
1x Video Cable
1x Power CableOnly the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.