Cảm biến báo cháy không dây thông minh sử dụng wifi tại Lotte Market
Thương hiệu: | Xem thêm Linh phụ kiện Thương hiệuMô tả ngắn về Cảm biến báo cháy không dây thông minh sử dụng wifi tại Lotte Market
Silence: In the alarm state, press the ”test” button to silence the buzzer, only the LED indicator flashes. Install the tuya Smart app on your smartphone the first time you use the detector. WiFi network status: When the LED indicator is on for 10s after charging the battery, it means the detector is successfully connected to WiFi. A) Launch the: Còn hàng
** Quét mã QR bằng Zalo để mua trên điện thoại
Giới thiệu Cảm biến báo cháy không dây thông minh sử dụng wifi tại Lotte Market
Description:
Silence: In the alarm state, press the ”test” button to silence the buzzer, only the LED indicator flashes.
Test: In normal state, long press the ”test” button for 2s to the sound and light alarm, the alarm message is sent to the mobile APP.
Install the tuya Smart app on your smartphone the first time you use the detector.
Mainly used for fire detection, when a fire occurs, the WiFi detector will immediately sound an alarm and be notified via APP
WiFi network status: When the LED indicator is on for 10s after charging the battery, it means the detector is successfully connected to WiFi.
Specification:
Make sure your smartphone is connected to WiFi.
A) Launch the app, click ”Add Device” --- ”Security Sensor” --- ”Sensor (WiFi) '/” Smoke (WiFi) ”.
B) Press and hold the ”Test” button for 5s until the LED flashes with a short beep of ”di” (press and hold the button within 20 seconds after charging the battery to enter WiFi setup mode).
C) Click ”OK” in the APP --- enter the password for WiFi, click ”OK”, the detector enters setup mode which lasts for 60s max.
A LONG ”di” beep with LED indicator on for 10s means the WiFi setup is complete. When the WiFi setup fails, the detector exits setup mode with a short 'Di Di' beep.
How to Install:
A. Drill a hole in the ceiling using the hammer drill
B. Install the expansion tube on the ceiling
C. Fix the installation plate using the screw
D. Point the alarm device with the installation plate and connect them, turn clockwise until you hear the sound ”kaca”, it means to install it correctly.
Size Chart:
120×31mm/4.72×1.22inch
Package Includes:
1 Piece Detector (Without Battery)
1 Piece Instruction Manual
1 Piece Screw Pack