Bút vẽ 3D có đèn LED dành cho trẻ em tại Lotte Market

Giới thiệu Bút vẽ 3D có đèn LED dành cho trẻ em tại Lotte Market

Description:
1.Discharging Mode: Hot Melt Extrusion Molding
2.Print Range: Unlimited
3.Spinning Speed: Adjustable
4.Temperature:Adjustable
5.Working Voltage: 5V 2A
6.The Nozzle Diameter: 0.7mm
7.Pen Color: Blue, Purple, Pink, Camouflage

Features:
1. Draw in the air and create 3D masterpieces.
2. Perfect for children, designer, artist and hobbyist.
3. It is lightweight in design and has easier speed control.

Product list:
1* 3D Pen
1* Adapter
1* User Manual
1* Bag (5m / 9m) 1.75mm PLA Filament (Color/Length random)
1* USB Cable(Please Use 5V/2A USB Charger,or It May Can't Work Well.)
1* Package Box（Neutral）

Please Note:

* This equipment is suitable for children above 8 years old and adults. Childen should use under the supervision of adults ! DO NOT touch the nib during using!
* Please read the manual carefully before using!
* Due to hand measure, the size may have 1-4 cm error
* Due to Different Monitor, the color may have difference
* Due to long shipping, the item may damage in transit, if the item damage, please contact us firstly immediately before leave feedback, thanks for your understanding

Safety tips( Read instructions first)

1. Please pay attention to the safety operation before connect to electric power. Don' t use this product near the bathroom bathtub, hand-washing basins or in the other places where is easy to contact water, otherwise it may trigger electric. Please unplug the power in time after using it.
2. This product has risk of burning after the pen heated. Please don't touch the position of pen head and nozzle
3. This product is suitable for children over age 6 and adults. Children use it need to be in the supervision of adults.
4. This product is not waterproof and breaking proof. It is forbidden to break or hit other hard objects with pen head. It is forbidden to insert foreign matter into filament loading hole and nozzle of pen.
5. This product use PLA/ABS filament material, diameter of filament is 1.75±0.02 mm. Please use the original adapted filament, if use non-original filament material, it may cause damage of pen.
6. Please make sure filament material was dropped out and power is cut off after using it.
7. In the first time of usage, if there is a little smoke from the nozzle but not influenced pens normal working. it is a normal status.
8. In order to test the performance of this product, the whole inspection is carried out before shipment. If there is same residual material in the nozzle of pen, it is normal and please feel free to use it.
9. Since this product is a precision product, in order to continuous use of the product. it is advise to cut off power 60 seconds after continuously using 1 hour of this product.