Bộ Truyền Tín Hiệu Không Dây 2 Trong 1 433mhz 12v Rf tại Lotte Market

Giới thiệu Bộ Truyền Tín Hiệu Không Dây 2 Trong 1 433mhz 12v Rf tại Lotte Market

433Mhz 12V RF Transmitter With Wireless Remote Control Switch Relay Receiver Module


Specification:
Input voltage: 12 V, RF operating mode: superheterodyne
Receiver sensitivity:> 97 dbm
Transmission distance:> 100 m (open space)

Decoding mode: MCU software decoding
Remote storage: 20
Remote type support: EV1527 learning code
Operating mode: momentary, toggle, latch delay (5s, 10s, 15s)
Output Terminal: No, NC, COM

Dimension of the PCB: 35x30x18mm (L, W, H)
Remote controlled battery: 2 button CR2016 3V batteries
Note: the maximum input power is 250 V

Remote programming

1. Clearing the code:
Press the learn button on the receiver 8 times, the codes will be reset.
After deleting the code, remotes will have to be recalibrated
2. Mode momentary
Please contact us for detailed usage instructions

3. Learning code: (toggle-button press the remote button to turn on, press again to turn off.)
Press the teach button on the receiver twice, wait a moment, the LED will be off, it will enter the learning state.
Press the learning button of the receiver 3 times, the LED (on the receiver) will blink 3 times.
When the LED is lit, press the button on the remote control (you want to let it learn), press the A button on the remote control, the LED will blink 3 times.
Press the remote control button B, Led flashes 3 times.

After 3 seconds, the LED indicator will be off, learning to succeed.

Package included:
1 x receiver module
1 x remote control (with battery)