Bộ thiết bị điều chỉnh nhiệt độ mỏ hàn an toàn Hakko T12 tại Lotte Market

Giới thiệu Bộ thiết bị điều chỉnh nhiệt độ mỏ hàn an toàn Hakko T12 tại Lotte Market

Color:blue black green
Material:plastic
T12 digital temperature controller (vibration switch + LED + knob)
T12 Soldering Tip shape-k
Input voltage: 12V-24V
Temperature adjustment range: 200C-480C
Maximum Power: 70W
Applies for: HAKKO T12 handle
Measuring Machine normal, lights and display status:
1. Unplugged T12 tip, turn the light flashed off, show SER, 1 seconds after the display 500.
2. T12 plug tip, boot light uniform flashing, indicating rapid heating from room temperature generally show the set temperature to rise, approaching the set temperature, strobe lights. Indicator is not flashing or intermittent flashes, indicating that the tip temperature reaches the set temperature or alternating temperature compensation.
When measuring machines on display digital bounce questions:
Because with the new T12 tip, the tip inside the heater did not burnt, it will be just a little jump start with warm, generally do not need special treatment, the natural use of 1-2 days basically not bounce up. If you need effective immediately, the general recommendations of the temperature to 350 380 while heating to the point of tin iron head, burning off after 4-5 minutes, until the tip to cool before you can reboot! (1 no action can be repeated 2-3 times)
Package Contents
1 x Digital Soldering Iron Station Temperature Controller Kits for HAKKO T12 Handle
Note: This product is a DIY Kits, buyers need to own welding. DIY risk, novice buy carefully, If it is man-made damage, we do not assume responsibility, Thank you for understanding.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.