Bộ Tản Nhiệt Nhôm Cho Máy Tính Nvme Ngff M.2 2280 tại Lotte Market
Thương hiệu: | Xem thêm Quạt và Tản Nhiệt Thương hiệuMô tả ngắn về Bộ Tản Nhiệt Nhôm Cho Máy Tính Nvme Ngff M.2 2280 tại Lotte Market
durable, firm and stable for us to use. The thermal pads can use to fill the master chip and flash memory chips height and increase the cooling effect. Good ductility, compatible with uneven surfaces. Groove design greatly Increases the heat dissipation area, with 5 Celsius- 15 Celsius cooling effect (varies depending on the environment). 2 NVME SSD. 2 SSD Hard: Còn hàng
** Quét mã QR bằng Zalo để mua trên điện thoại
Giới thiệu Bộ Tản Nhiệt Nhôm Cho Máy Tính Nvme Ngff M.2 2280 tại Lotte Market
durable, firm and stable for us to use.for easily installation.
The thermal pads can use to fill the master chip and flash memory chips height and increase the cooling effect.
Nano heat-conducting silica gel pad. Good ductility, compatible with uneven surfaces. Low viscosity, easy to Remove.
Groove design greatly Increases the heat dissipation area, with 5 Celsius- 15 Celsius cooling effect (varies depending on the environment).
Universal fit for 22 x 80 size (22x80mm) M.2 NVME SSD.
Product Type : M.2 SSD Hard Drive Disk Heatsink
Number of teeth: 8 pieces
Universal fit for 2280 M.2 SSD:
Samsung 950Pro / 960Evo / PM951 / PM961 / SM951 / SM961 / 970 EVO / 970 PRO etc
Intel Optane SSD 800P Series, Intel SSD 760p Series, Intel SSD 660p Series, Intel SSD 600p Series
SanDisk: X300 / X300S / X400 / Z400S / X110 / A400
Transcend: MTS800 / MTS820
ADATA: SP550 / ASX7000NP / XPG-SX6000 / XPG-SX8000 / XPG
GAMMIX S10 / SU800 / AXNS381E
Toshiba: Q200 / XG3 / XG4 / OCZ RD400 / THNSNK / OCZ RD400
colour:black
Material:aluminum
size:7x2.2x0.3cm
Package Contents:
1 * heat sink
1 * Clean Dry Wet Wipes
1 * High thermal conductivity silicone pad
2 * rubber band
1 * Screwdriver
2 * screwOnly the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.