Bộ màn hình hiển thị LCD 4.3 ” + Camera gắn đuôi xe hơi tại Lotte Market
Thương hiệu: | Xem thêm Điều hướng & Bộ thu AV Thương hiệuMô tả ngắn về Bộ màn hình hiển thị LCD 4.3 ” + Camera gắn đuôi xe hơi tại Lotte Market
3-inch 16: 9. Power supply: DC 12V-24V. Power consumption: 2W. Storage Temperature: -20°C ~ + 70°C. Bla screen when no signal. 5CM * 7. 8CM(Length * width *thi). Image Sensor:7070. Resolution:PAL:682 H*504 NSTC: 648 H*488 V. Electronic Shutter:1s-1/10000s. Video Output:1. View Angle:120°. Waterproof Rate:IP67. Please replace the same parameters of cartridge fuse. Installation should be solid and reliable, to prevent: Còn hàng
** Quét mã QR bằng Zalo để mua trên điện thoại
Giới thiệu Bộ màn hình hiển thị LCD 4.3 ” + Camera gắn đuôi xe hơi tại Lotte Market
FeaturesMonitor
1. 4.3-inch 16: 9
2. Resolution: 480 * 272
3. Power supply: DC 12V-24V
4. Visual range: 96 * 54mm
5. Power consumption: 2W
6. Working temperature: -15°C ~ + 50°C
7. Storage Temperature: -20°C ~ + 70°C
8. Interface: AV video interface, a standard power connector road
9.Bla screen when no signal
10. Product Dimensions: 11.5CM * 7.5CM * 0.8CM(Length * width *thi)
Car Caa
1.Image Sensor:7070
2.Video System:PAL/NTSC
3.Resolution:PAL:682 H*504 NSTC: 648 H*488 V
4.Horizontal Resolution:480TVL
5.Electronic Shutter:1s-1/10000s
6.SNR:>;48dB
7.Min Illumination:0.01LUX
8.Video Output:1.0Vp-p/ 75Ω
9.View Angle:120°
10.Working Voltage:DC9V-12V±0.5V
11.Waterproof Rate:IP67
Note:
1.Connect the power cord must distinguish between positive and negative (red +, bla -) If you pi the wrong, cartridge fuse blows immediately. Please replace the same parameters of cartridge fuse.
2.Two main components both are LCD screen,the surface is glass structure, please note that anti-extrusion.
3.Installation should be solid and reliable, to prevent the situation of falling when the car is brakeing or running and causing personal and equipment accidents.
4.12v-24V DC contact should be connected to the main power supply in order to prevent excessive voltage affecting the normal use of the hine.
Kindly reminded
the monitor can be connected to a voltage range between 12-36V,but caa could only be connected to 12V,if you wiring with voltage over 12V,the caa may get burnt.Thanks for understanding.