Notice: file_put_contents(): write of 3484 bytes failed with errno=28 No space left on device in /home/libs.com/public_html/libs_chung/v4/_product.php on line 111

Warning: file_put_contents(): Only -1 of 3484 bytes written, possibly out of free disk space in /home/libs.com/public_html/libs_chung/v4/_product.php on line 111
Bo mạch bảo vệ pin Lithium 11.3s 12.6V 25A W / Balance 18650 Li-ion

Bo mạch bảo vệ pin Lithium 11.3s 12.6V 25A W / Balance 18650 Li-ion tại Lotte Market

Thương hiệu: | Xem thêm Mạch & Bộ phận điện Thương hiệu  

Mô tả ngắn về Bo mạch bảo vệ pin Lithium 11.3s 12.6V 25A W / Balance 18650 Li-ion tại Lotte Market

3 Series 18650 battery. 6V (Li-ion battery full charge voltage). The lithium battery protection board is not included the welding tabs. 6V Li-ion charger to charge it. 2)Above 3A device,means the battry discharge rate is more than 3C. 3C rated battery means 2ahx3=6A Max working current. when ONE cell voltage get 4. battery internal resistance differences within 5 milliohm, voltage
: Còn hàng
: Shopee
70.000đ 70.000đ
** Quét mã QR bằng Zalo để mua trên điện thoại

Giới thiệu Bo mạch bảo vệ pin Lithium 11.3s 12.6V 25A W / Balance 18650 Li-ion tại Lotte Market

Description:
Bo mạch bảo vệ pin Lithium 11.3s 12.6V 25A W / Balance 18650 Li-ion
3 Series 18650 battery
11.1V (Li-ion 18650 or li-ion battery rated voltage)
12.6V (Li-ion battery full charge voltage)
10.8V ( Lipo battery pack rated voltage)
The lithium battery protection board is not included the welding tabs.

BMS activate method : Use 12.6V Li-ion charger to charge it.

NOTE:
1) This board is not suit high power electronic tools, if use for screwdrier and drill,electric bike series make,fishing machine and 1W LED, please don't buy this.

Bo mạch bảo vệ pin Lithium 11.3s 12.6V 25A W / Balance 18650 Li-ion
2)Above 3A device,means the battry discharge rate is more than 3C.
1C rated battery, 2000mah equals 2ah*1=2A max working current.
3C rated battery means 2ahx3=6A Max working current.

Balancer is just a Auxiliary function, The balancing means when the battery charging,each series battery need with the same voltage.when ONE cell voltage get 4.2V ,the other cells not, the first cell voltage will discharge to wait the other cells rising to the same level.
Note:
battery internal resistance differences within 5 milliohm, voltage within 0.03 V voltage, capacity vary within 50 ma

Features:
1) high-accuracy voltage detection circuit;
2) terminal of the charger using high voltage device;
Bo mạch bảo vệ pin Lithium 11.3s 12.6V 25A W / Balance 18650 Li-ion
3) Built-in three-stage over-current detection circuit (over-current 1, over-current 2, or load short circuit);
4) MOS transistor can control the battery charge and discharge;
5) low standby current consumption

Application:
Vacuum cleaner,massager battery pack,LED backup power supply,12V li-ion electronics, solar power led, ect

Specifications:
Over Charge voltage:4.25-4.35v±0.05v
Over Discharge voltage: 2.3-3.0v±0.05v
Max Working current: 20-25A
Bo mạch bảo vệ pin Lithium 11.3s 12.6V 25A W / Balance 18650 Li-ion
Max Instantaneous current: 35-40A
Working temperature:-40~+50℃
Storage Temperature:-40~+80℃
Static current: <30uA
Life cycle:more then 30000 hours
Internal Resistance: Less than 100mΩ
Short Cut:Protectable,Charge can repair
Size: 5.7x4.5cm/2.24x1.77inch
Quantity: 1 Pc
Note:
Please allow 1-3mm error due to manual measurement. pls make sure you do not mind before you bid
Bo mạch bảo vệ pin Lithium 11.3s 12.6V 25A W / Balance 18650 Li-ion
Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!

Package Contents: 
1 Pc x PCB Protection Board#CRE #3S #11.1V #12.6V #25A #W/Balance #18650 #Li-ion #Lithium #Battery #PCB #Protection #Board

Chi Tiết Bo mạch bảo vệ pin Lithium 11.3s 12.6V 25A W / Balance 18650 Li-ion