Bộ Khung Gắn Camera Cho Drone Dji Phantom 4 Pro tại Lotte Market
Thương hiệu: | Xem thêm Phụ kiện máy ảnh Thương hiệuMô tả ngắn về Bộ Khung Gắn Camera Cho Drone Dji Phantom 4 Pro tại Lotte Market
Tips 1:. But it works because we tested before sell. Tips 2:. Especially the Y motor, it need professinal tool to fix and replace. Tips 3:. Step 1: Measure the deviation angle of the gimbal camera;. Step 3: Drill a screw hole with an electric drill on the metal plate. Step 4: Install the Y motor: Còn hàng
** Quét mã QR bằng Zalo để mua trên điện thoại
Giới thiệu Bộ Khung Gắn Camera Cho Drone Dji Phantom 4 Pro tại Lotte Market
Tips 1:
Please note that these Motors is used. But it works because we tested before sell.
For now,nobody have this new these Motors because dji company forbid to sell.
Tips 2:
Kindly reminder: These parts require professionals and professional tools to replace. Especially the Y motor, it need professinal tool to fix and replace. We recommend that you check with your local professinal repairnan before buy it.
Tips 3:
If the gimbal camera doesn't fixed in the center after install the Y motor, pls following below steps to settle the problem.
Step 1: Measure the deviation angle of the gimbal camera;
Step 2: Measure and mark making on the counterclockwise direction of the metal plate (the one for motor, above the shock-absorbing plate, next to the flat cable);
Step 3: Drill a screw hole with an electric drill on the metal plate. (If the gimbal camera go to the left deviation of 45 degrees, then pls drill a hole of 45 degrees to the right.)
Step 4: Install the Y motor.