Bộ dung dịch sửa chữa kính chắn gió xe hơi tiện dụng tại Lotte Market

Giới thiệu Bộ dung dịch sửa chữa kính chắn gió xe hơi tiện dụng tại Lotte Market

Description:

The compact size makes it very convenient for you to carry and store. Simple use and operation make it not waste your time and energy.
Its effective and efficient feature makes it an excellent glass repair tool. The wide range of applications allows it to be used in multiple scenarios.
Made of plastic and liquid material, it is very durable to use.
The length of this product is 6.7cm and the width is 1.7cm.
It allows you to repair small glass damage caused by traffic accidents, collisions, etc. And it can be used in conjunction with a curing lamp to achieve a better repair effect.

Item Name: Car Window Repair Fluid
Material: Plastic,Liquid
Capacity: 3ml
Features: Easy to Use, Glass Repair Tool, Car Maintenance Tool
Size Details:
Size: 6.7cm x 1.7cm/2.64” x 0.67” (Approx.)

Notes:
Due to the light and screen setting difference, the item's color may be slightly different from the pictures.
Please allow slight dimension difference due to different manual measurement.

Steps for Usage:
1. Clean the area around the broken glass opening. The old wound can be cleaned up with a cotton swab dripping repair liquid, and there should be no residual moisture or stains.
2. Locate the glue injection port at the damaged place, and use a pick pin to remove the broken glass.
3. Cut the long strip of cured film according to the length of its damage (don't cut the width to ensure that it can completely cover the crack).
4. Spot the repair solution along the damaged part of the crack, then use the cured film to quickly cover it, and place the crack in the middle of the cured film and should be completely covered.
5. Squeeze out all the air bubbles between the glass and the cured film. The entire cured film is completely glued to the glass by the repair liquid and fully adhere to the glass. During the entire repair process, please keep the cured film from displacement and air.
6. Drop a drop of liquid on the suction cup, and then press it firmly in the middle of the crack for 1 minute to make the suction cup and the cured film fit (the suction cup is best at the broken opening of the crack).
7. Use your index finger to lift up the suction cup (do not pull off the attention), and keep it lifted for more than 2-3 minutes.
8. During the period, you will see bubbles constantly emerging, pull once to squeeze the bubbles from the cured film once, and then continue to pull the agent bubbles.
9. Keep patience and change a position and then pull it up several times until there are no cracks and black spots, and the cracks gradually fade.
10. Observe the cracks at a 45 degree angle. The black dots quickly move to the suction cup lifting position and disappear.
11. With a pen, align the middle of the crack in the car and move to the top crack (please pay attention to the right)