Bộ dụng cụ sửa chữa vết lõm xe hơi 2 trong 1 tiện lợi tại Lotte Market

Giới thiệu Bộ dụng cụ sửa chữa vết lõm xe hơi 2 trong 1 tiện lợi tại Lotte Market

#Tools #Auto #Repair #Tool #Car #Dent #Repair #Dent #Puller #Kit #2 #in #1 #Slide #Hammer
Tools Auto Repair Tool Car Dent Repair Dent Puller Kit 2 in 1 Slide Hammer Reverse Hammer Glue Tabs Suction Cups
100% brand new and high quality
Features:
1.Clean the dent with a clean wet cloth;

2.Mount the glue stick into the glue gun,pull the trigger to let the glue stick enter into the glue gun, connect the power source and preheat for 5 minutes;
3.Use a proper drawing gasket. Large dent requires a large drawing gasket. (Note: The larger the drawing gasket is, the larger the drawing force is);
4. Pull the trigger and apply the drawing gasket with extruded glue (The 4 holes of gasket should be applied with hot melt glue);
5. Fast place the drawing gasket with hot melt glue at the center of dent, press lightly until the glue cures and adheres (Let the glue cool for about 8 minutes. The cooling time should be less than 10 minutes and should be shorter slightly in winter);

6. Align the T-shaped repairer and press the drawing gasket with hot melt glue, pull the sliding rod backwards to pull up the dent;
7. Check with a Line board. If dent still exists, knock it slightly with a flattening hammer or pen;
8. Clean the repaired place with a clean wet cloth.


Specifications:
Material: metal
Color: silver
Size: Length: 47.5cm(18.7in), Wide:12cm(4.72in)

Quantity: 1 Set

Note:
Transition: 1cm=10mm=0.39inch

Please allow 0-1cm error due to manual measurement. pls make sure you do not mind before you bid.
Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!

Package includes:(No retail package)

1 set of rods with 12 mats