Bộ dụng cụ lắp đặt ốc vít cho xe đạp leo núi tại Lotte Market

Giới thiệu Bộ dụng cụ lắp đặt ốc vít cho xe đạp leo núi tại Lotte Market

TOOPRE Outdoor Bicycle Star Nut Setting Installing Tool Setter Kit MTB Road Bike Fork Headset Installer Cycling Accessories
Feature:
Aluminum alloy hardened heat treatment, anodic oxidation, surface sandblasting treatment.
CNC turning, star nut into more accurate, centering does not run off, automatic positioning depth, edge chamfering rounded not scratching hands.
Star nut with hardened heat treatment, high hardness, surface polishing nickel plating process, repeated knocking is not easy to deformation, long service life.
Surface anodizing, sandblasting treatment, installation does not slip, the surface presents a delicate metal texture.
304 stainless steel material used without rust, put the handlebar screws are wear parts, the use of replaceable design, greatly increasing the life of the tool.

Specification:
Name: Bicycle Fork Star Nut Installing Tool
Material: Stainless Steel + Aluminum Alloy
Color: Blue
Weight: About 102g/set
Size: 
Auxiliary sleeve height: about 47mm/1.85in, diameter: about 32mm/1.26in
Star nut rod length: about 35mm/1.38in, diameter: about 15mm/0.59in
Handlebar Screw length: about 30mm/1.18in, one end fits 3mm hexagon
Package size: about 165*100mm/6.5*3.94in
Applicable: Upper 28.6mm OD fork (aluminum, steel, titanium fork)

Installation steps: 
1. Screw on the star nut, screwed to the end.
2. Screw the star nut tool aligned with the fork, set the sleeve and hold it by hand.
3. Use a rubber hammer to knock the star nut rod into place to complete the installation.

Note:
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-2cm measuring deviation due to manual measurement.



Included:

1 Set X Bicycle Star Nut Installing Tool