Bộ Dụng Cụ Hàn Dao Động Kĩ Thuật Số Mới tại Lotte Market

Giới thiệu Bộ Dụng Cụ Hàn Dao Động Kĩ Thuật Số Mới tại Lotte Market

Description:
Digital DIY Oscilloscope Kit uses ARM Cortex-M3 processor (STM32F103C8), 2.4-inch color TFT display screen can be used as ARM test development board. Can freeze at any time waveform display (HOLD function).Comes 1Hz /3.3V square wave test signal source.
Can be secondary development on the basis of this kit, for example, it can be changed to Millivoltmeter, data loggers.Adjustable vertical displacement, and with instructions.
With automatic, regular and one-shot modes, easy to capture the moment waveform.Available rising or falling edge trigger.Observable
With waveform parameter digital display, including frequency, period, pulse width, duty ratio, MAX./MIN./AVG./Peak-Peak/virtual values.Waveform storage function: will not lose the waveform after power off.
Short-circuit and open-circuit detection: can help the user find out the soldering error.TFT controller recognition function.The SMD has been soldered, more suitable for electronic beginner.
Specification:
Maximum Real-time Sampling Rate: 1Msps
Accuracy: 12Bit
Sampling Buffer Depth: 1024 bytes
Analog Bandwidth: 0-200KHz
Vertical Sensitivity: 10mV / Div - 5V / Div (1-2-5 progressive manner)
Input Impedance: 1M
Maximum Input Voltage: 50Vpp (1: 1 probe), 400Vpp (10: 1 probe)
Coupling Modes: DC / AC / GND
The Horizontal Time Base Range: 10μs / Div - 50s / Div (1-2-5 progressive manner)
Supply Voltage: DC 9V
Size Chart:
Approx. 117x76mm / 4.6x2.99inch
Package Includes:
1 Piece DIY Cover
1 Piece DSO Oscilloscope Kit(The DIY kit is soldered)
1 Piece Probe
3 Piece User Manual(English)