Bộ động cơ servo kỹ thuật số 2G bằng nhựa cho máy bay điều khiển từ xa 1/24 tại Lotte Market
Thương hiệu: | Xem thêm Đồ chơi điện tử & phụ kiện Thương hiệuMô tả ngắn về Bộ động cơ servo kỹ thuật số 2G bằng nhựa cho máy bay điều khiển từ xa 1/24 tại Lotte Market
Chào mừng bạn đến cửa hàng của tôi. Tận hưởng dịch vụ tốt nhất. Chúng tôi có. Hậu cần kịp thời nhất,. Tôi hy vọng rằng bạn có một trải nghiệm mua sắm khó quên, đừng quên chú ý đến chúng tôi, sự hỗ trợ của bạn là động lực lớn nhất của chúng tôi !!!. The plastic gear can: Còn hàng
** Quét mã QR bằng Zalo để mua trên điện thoại
Giới thiệu Bộ động cơ servo kỹ thuật số 2G bằng nhựa cho máy bay điều khiển từ xa 1/24 tại Lotte Market
Chào mừng bạn đến cửa hàng của tôiTrong cửa hàng của chúng tôi, bạn sẽ
Tận hưởng dịch vụ tốt nhất
Nhận sản phẩm tốt nhất.
Chúng tôi có
Sản phẩm chất lượng tốt nhất,
Hậu cần kịp thời nhất,
Giá cả phải chăng nhất.
Tôi hy vọng rằng bạn có một trải nghiệm mua sắm khó quên, đừng quên chú ý đến chúng tôi, sự hỗ trợ của bạn là động lực lớn nhất của chúng tôi !!!
Feature:
1. Made of high‑quality materials, it is durable, anti‑corrosion, to ensure long‑term use.
2. The plastic gear can withstand higher loads to ensure the normal operation of the servo.
3. High efficiency, low noise, low power consumption during operation, and easy installation and disassembly.
4. Equipped with plastic gear, it has high precision and under digital control, more convenient to use.
5. The package contains different servo arms to meet your needs and bring you convenience.
Specification:
Item Type: 2G Digital Servo with Servo Arm Set
Model: S0002P
Material: ABS + Plastic
Product Color: Black
Product Size: Approx. 17.2x16.1x8.3mm / 0.7x0.6x0.3in
Product Weight: Approx. 11g / 0.4oz
Voltage: 3.7-4.2V DC
Torque: ≥0.30kgf·cm
Rated Torque: ≥0.1kgf / cm
Speed: ≤0.07sec/60° at 4.2V
Operability Angle: 180°±10°(500-2500μs)
Mechanical Limit Angle: 360°
Motor Type: Coreless Motor
Compatibility: Suitable for 1/24 RC Car Fixed-wing, Helicopter, Aircraft
Package List:
1 x
2G Plastic Servo 4 x Servo Arm3 x Screw
Note:
1. Please allow 1‑3mm error due to manual measurement. Thanks for your understanding.
2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.
3. There will be differences in the installation of different grams of servos, please refer to the actual installation.
4. The accessories of different grams of servos will be different, please refer to the real object in the package.
How to Use
1. Install the servo to the servo base first, without installing the servo arm or servo protection. Only fix the servo. Then connect the servo to the receiver, usually the CH1 or for ST jack, and the three wires are the bottom wire, VCC and signal/PWN.
2. After the servo is fixed, turn on the remote control, and turn on the ESC after setting it, and then the servo will stop at a fixed position.
3. Without turning off the