Bộ điều khiển từ xa không dây 433MHz DC 12V 10A 1CH tại Lotte Market

Giới thiệu Bộ điều khiển từ xa không dây 433MHz DC 12V 10A 1CH tại Lotte Market

”Wiring diagram 1:
+V : 12V + input
- V: 12V - input
NO: Output , normal open
COM:Output , common
NC: Output , normal close

About Working mode:
Momentary: Push the remote button , the relay connects, release the remote button , the relay dis-connects.
Toggle: Push once the remote button , the relay connects , push twice the remote button , the relay dis-

connects
Latching: Push the remote button A, the relay connects, push the remote button B, the relay dis-connect.
Time delay mode :Push the remote control button , the relay connects , from when release the remote button ,

after 5s or 10s or 15s , the relay disconnect automatically
Clearing the code :
Push the learning button on the receivers for 8 times , the codes will be cleaned .
After clearning the code, all the remote control cannot work any more.
Learning the code : (momentary)
Push the learning key on the receiver once time , it comes into momentary setting mode .
Wait for a moment , the LED will be off , it comes into learning state .
Push the remote button , LED indicator on the receiver board will flash then come off .
After 3 seconds, the LED indicator will be on again , learning successfully .
Learning the code : ( Toggle )
Push the learning key on the receiver twice time , it comes into toggle setting mode
Wait for a moment , the LED will be off , it comes into learning state .
Push the remote button,LED indicator on the receiver board will flash then come off.
After 3 seconds , the LED indicator will be on again , learning successfully .
Learning the code : ( Latching )
Note: When you choose for latching mode , in order to learn more remote control , you need to learn two

Specifications:
Input Power:DC10V-14V
Standby Current:<5MA
RF Frequency:315M or 433M
RF working mode:superheterodyne
Receive sensitivity: >97dbm
Transmitting distance: 20 meters above
Decoding mode:MCU software decoding
Remote storage: 25 pcs
Support remote type: Learning code, Fixed code(Rolling code can be design)
Working mode:Momentary, Toggle, Latching Time delay (5s ,10s ,15s )
Wiring type:fixed terminal
Output Terminal :NO , NC , COM
Size: 3.4x3cm/1.34x1.18inch 5.5x2.8cm/2.17x1.1inch
Quantity: 1 Set

Note:
1.Transition: 1cm=10mm=0.39inch
2.Please allow 0-3cm error due to manual measurement. pls make sure you do not mind before you bid.
3.Due to the difference between different monitors, the picture may not reflect the actual color of the item.

Thank you!

No Retail Package
Package includes:
1 Pc x Receiver Module with shell
1 Pc x Remote Controller”