Bộ Điều Khiển Tốc Độ Động Cơ Không Chổi Than Dc 6v 12v 24v Pwm Dc 6-30v Bldc tại Lotte Market

Giới thiệu Bộ Điều Khiển Tốc Độ Động Cơ Không Chổi Than Dc 6v 12v 24v Pwm Dc 6-30v Bldc tại Lotte Market

This speed governor is suitable for a 3-phase brushless motor with built-in drive, which can adjust the speed and switch between forward and reverse.
Suitable for PWM speed regulation of some built-in 3-phase brushless motors, brushless fan speed regulation, etc.
There are 2 levels of frequency that can be switched between 2khz and 20khz, and the default shipping frequency is 20k.

【Speed regulation method】Stepless speed regulation
【Frequency switching】 The default position is 20khz (that is, the 2-pin near the terminal port) by the 2-pin of the speed control knob is 2khz
【Function】 Forward and reverse switching, stepless speed regulation, brake braking (need to have the brake function of the motor)

【Note:】
The speed control board does not have the FG signal speed measurement function. When wiring, please leave the FG signal speed measurement line open on the side and do not connect to the governor
【Voltage】6-30v
Power: 90W
Maximum current: 3A

Function introduction of each part
1. Forward and reverse toggle button
2. Emergency stop button
3. Acceleration and deceleration adjustment knob
4. Connect the speed control line PWM
5. The brake wire of the DC brushless motor is connected here.
6. CW or CCW, line connection for forward and reverse switching
7. Connect the positive pole of the motor
8. Connect the negative pole of the motor
9. Connect the negative pole of the DC power supply
10. Connect the positive pole of the DC power supply