Bộ Điều Khiển Nhiệt Độ Kỹ Thuật Số Mini Siêu Nhẹ Cho Bể Cá / Phòng Thí Nghiệm tại Lotte Market

Giới thiệu Bộ Điều Khiển Nhiệt Độ Kỹ Thuật Số Mini Siêu Nhẹ Cho Bể Cá / Phòng Thí Nghiệm tại Lotte Market

----------------------- -Produkasyong Impormasyon - ------------------ -------

Magpadala upang magpadala ng High kalidad Binungunang presyo Brand bagong 100%
Pinakamahusay na Presyo ng Dami ng Shopee upplier Info invoice
Mga sorpresa para sa iyo:
Sundin ang mga shop / ”Tulad ng” Item: Priority Shipping & Free Gift
PS: Kung nais mo ng isang libreng regalo, mangyaring ipadala sa akin ang screen na sinusundan mo ang aking shop at mag-iwan ng mensahe sa iyong order. # Xiyijiaproduct

Feature:
1. Mini and light weight design. Large and clear LCD display screen.
2. Dual heating and cooling functions, automatic over‑temperature alarm. Control the temperature by setting the temperature setting value and different values.
3. The mini temperature controller is an excellent and convenient multi‑function device for controlling the temperature of the aquarium. The stability of aquarium temperature is one of the key factors to promote fish healthy and safety.
4. By using the temperature controller, you can provide the best temperature environment for your fish. This advanced temperature controller can measure and control temperatures from ‑50 to 90℃。
5. The equipment is also suitable for laboratory use and other temperature control systems.

Specification:
Condition: 100% brand newItem type: Temperature ControllerMaterial: ABS flame retardant plastic caseColor: As picture shownWeight: Approx. 130g Power supply voltage: 110-220VAC ± 10%, 50/60Hz (or DC12V / DC24V)
Measuring and controlling temperature range: -50℃～+110℃
Resolution: 0.1°C
Accuracy: ±1℃
Accuracy: ±1℃
Relay output contact capacity:
Heating: 10A/240VAC,
Cooling: 10A/240VCA
Sensor h type: imported NTC sensor, cable length 1m/3.3ft
Description:
P0. Cooling and heating mode
Please set to C for high temperature start as cooling mode
Low temperature start is heating mode, please set to H
P1. Hysteresis setting
In heating mode (H): the measured value ≤ the set value-when the hysteresis starts to output the heating to the set value and stops.
In the cooling mode (C): when the measured value ≥ the set value + hysteresis, the output cooling is started and the set value stops.
P2. The highest setting range: the highest value does not exceed this value when setting the temperature
P3. The lowest setting range: the lowest value when setting the temperature is not lower than this value
P4. Temperature correction
When there is a deviation between the measured temperature and the standard temperature, you can use this function to correct. The corrected temperature = the temperature before correction + the corrected value.
P5. Delay start time unit: minute
When controlling the refrigeration of the compression engine equipment, the delay time can be set according to the needs. The equipment will not start immediately when the controller is output, and it needs to start after the set delay time is run.
P6. High temperature alarm
When the m