Notice: file_put_contents(): write of 3667 bytes failed with errno=28 No space left on device in /home/libs.com/public_html/libs_chung/v4/_product.php on line 111

Warning: file_put_contents(): Only -1 of 3667 bytes written, possibly out of free disk space in /home/libs.com/public_html/libs_chung/v4/_product.php on line 111
Bộ Điều Khiển Nhiệt Độ Kỹ Thuật Số - 60~500 C K-Type M6

Bộ Điều Khiển Nhiệt Độ Kỹ Thuật Số - 60~500 C K-Type M6 tại Lotte Market

Thương hiệu: | Xem thêm Phụ kiện thủy sinh Thương hiệu  

Mô tả ngắn về Bộ Điều Khiển Nhiệt Độ Kỹ Thuật Số - 60~500 C K-Type M6 tại Lotte Market

#Digital #Temperature #Controller #-60~500℃ #K-type #M6 #Probe #Thermocouple #Sensor #Embedded #Thermostat. 100% brand new and high quality. There are two sets of digital tubes showing the actual temperature and the set temperature respectively. Operation use:. Blue digital tube: set temperature. Button minus: Decrease the setting temperature. Set button (SET):. Press and hold SET to enter the parameter setting options. After
: Còn hàng
: Shopee
256.572đ 256.572đ
** Quét mã QR bằng Zalo để mua trên điện thoại

Giới thiệu Bộ Điều Khiển Nhiệt Độ Kỹ Thuật Số - 60~500 C K-Type M6 tại Lotte Market

#Digital #Temperature #Controller #-60~500℃ #K-type #M6 #Probe #Thermocouple #Sensor #Embedded #Thermostat Bộ Điều Khiển Nhiệt Độ Kỹ Thuật Số - 60~500 C K-Type M6
Digital Temperature Controller -60~500℃ K-type M6 Probe Thermocouple Sensor Embedded Thermostat
100% brand new and high quality

Features:
The product has a total of four buttons, button plus, button minus, SET (setting button), reset button. There are two sets of digital tubes showing the actual temperature and the set temperature respectively. All parameters are automatically remembered after 5 seconds of setting.
Operation use:
Red digital tube: actual temperature
Bộ Điều Khiển Nhiệt Độ Kỹ Thuật Số - 60~500 C K-Type M6
Blue digital tube: set temperature
Button plus: Increase the set temperature
Button minus: Decrease the setting temperature
Restore factory settings: Press and hold the button plus button for more than 5s at the same time, the system will restore the original settings data.

Set button (SET):
1. Short press SET, set the temperature to add 50 °C each time, the user can quickly press SET to quickly set to the vicinity of the preset temperature value, and then fine-tune to the preset temperature by pressing the button.
Bộ Điều Khiển Nhiệt Độ Kỹ Thuật Số - 60~500 C K-Type M6
2. Press and hold SET to enter the parameter setting options. There are several parameters of P00~P05 for the user to set. After entering the parameter interface, press SET shortly to switch P00~P05. Under the corresponding parameters, the corresponding data is added or subtracted by pressing the button, and the automatic memory data is returned to the display interface after the system is completed for 10 seconds.

Code Cable:
P00: H heating mode / C cooling mode
P01: Temperature difference backlash (0~500℃)
P02: Temperature correction(-10~10℃)
P03: Maximum temperature alarm value (500℃)
Bộ Điều Khiển Nhiệt Độ Kỹ Thuật Số - 60~500 C K-Type M6
P04: Minimum temperature alarm value (-60℃)
P05: Data lock (ON/OFF)

Specification:
Voltage: DC12V
Output: 10A relay
Temperature control range: -60~500℃
Bộ Điều Khiển Nhiệt Độ Kỹ Thuật Số - 60~500 C K-Type M6
Temperature accuracy: 1℃
Resolution: 0.1℃
Refresh rate: 0.5S
Shell material: ABS
Dimensions: 79x43x26mm/3.11x1.69x1.02inch
Installation size: 74x39mm/2.91x1.54inch
Cable length: 42cm
Bộ Điều Khiển Nhiệt Độ Kỹ Thuật Số - 60~500 C K-Type M6
Color: Black
Quantity: 1 Set
Note: 1.Please allow 0-2mm error due to manual measurement. pls make sure you do not mind before you bid.
2.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!

Package includes:
1 x Digital Temperature Controller
Bộ Điều Khiển Nhiệt Độ Kỹ Thuật Số - 60~500 C K-Type M6
1 x K-type M6 Thermocouple

Chi Tiết Bộ Điều Khiển Nhiệt Độ Kỹ Thuật Số - 60~500 C K-Type M6