Notice: file_put_contents(): write of 3259 bytes failed with errno=28 No space left on device in /home/libs.com/public_html/libs_chung/v4/_product.php on line 111

Warning: file_put_contents(): Only -1 of 3259 bytes written, possibly out of free disk space in /home/libs.com/public_html/libs_chung/v4/_product.php on line 111
Bộ cảm biến chuyển động hồng ngoại PIR - Lotte Market

Bộ cảm biến chuyển động hồng ngoại PIR tại Lotte Market

Thương hiệu: | Xem thêm Dụng cụ & thiết bị lớn Thương hiệu  

Mô tả ngắn về Bộ cảm biến chuyển động hồng ngoại PIR tại Lotte Market

100% brand new and high quality. Rated Voltage:220V 50HZ. Load Power:filament lamp ≤100W. Delay:20s (people are moving within the sensing range, the switch will auto delay and keep connecting;if people stay still,switch will stop responsing). Sensing Angle:110°. Adaptive to filament, electricity saving lamp. If poeple come. Inner body auto sensor adopts infrared heat releasing device,and it can accurately capture moving
: Còn hàng
: Shopee
98.000đ 98.000đ
** Quét mã QR bằng Zalo để mua trên điện thoại

Giới thiệu Bộ cảm biến chuyển động hồng ngoại PIR tại Lotte Market

Description:
Bộ cảm biến chuyển động hồng ngoại PIR
100% brand new and high quality
Specification:
1.Sensing Mode:PIR sensing + light control
2.Rated Voltage:220V 50HZ
3.Output Way:Controllable Silicon
Bộ cảm biến chuyển động hồng ngoại PIR
4.Load Power:filament lamp ≤100W
electricity saving lamp ≤30W
LED≤18W
5.Delay:20s (people are moving within the sensing range, the switch will auto delay and keep connecting;if people stay still,switch will stop responsing)
6.Sensing Distance:3-6m (high temperature will influence switch sensibility)
Bộ cảm biến chuyển động hồng ngoại PIR
7.Sensing Angle:110°
8.Sensitivity to light :darkeness
Features:
1.Adaptive to filament, electricity saving lamp
2.This lamp is internal equipped with auto body sensor.If poeple come.the lam will power on;if people leave,the lamp will power off
Bộ cảm biến chuyển động hồng ngoại PIR
3.Inner body auto sensor adopts infrared heat releasing device,and it can accurately capture moving low frequency signal and automatically power on
4.When people leave,the lamp will auto dalay power off,convenient and energy saving
5.Inner side of the lap is set up with auto ambient brightness detecting circuit.Only when ambient brightness is lower than setting value,the sensor will receive sense and let the lamp power off.And it is energy saving
Notice:
1.When installing,please disconnect the power to guarantee safety
Bộ cảm biến chuyển động hồng ngoại PIR
2.Don't apply it to overpower current or voltage
3.Don't install it accessible to water
4.Detection distance will change according to ambient temperature's difference.In summer,detection distance is short(it is obvious when close to human body's temperature);in winter, detection distance will be far
5.Don't install it in lower than -20 Celsius or higher than 60 Celsius
6.Don't expose it to sun
Bộ cảm biến chuyển động hồng ngoại PIR
7.Don't install it in which there are moving objects
8.The first time power on ,there will one minute initiation;during this period,the device will shine,it is normal phenomenon
9.In coast zone,thermal flow will trigger the sensor because of ocean current.If installing filament lamp which emits great heat,please keep far away from the sensor(at least 1m)
package include:1pc Sensor Control Switch

Chi Tiết Bộ cảm biến chuyển động hồng ngoại PIR