Bộ 4 đèn LED 3D gắn cửa xe hơi Toyota Highlander/Camry/ Prius/Sienna/Tundra tại Lotte Market

Giới thiệu Bộ 4 đèn LED 3D gắn cửa xe hơi Toyota Highlander/Camry/ Prius/Sienna/Tundra tại Lotte Market

1.High quality: We use LED chip which has high light output but low consumption, with HD projector provides a bright and clear logo shadow on the ground.
2.Plug and Play: Easy to install, no drilling, no wiring, no damage to your car. Dedicated to for the TOYOTA car, installation is simple, directly replace the car door lights.
3.Long life-span:High temperature resistant and Fast heat dissipation,Free from pollution, noise and electronic interference.Lasting constant, luminous uniformity, full of light and color.
4.Open and Close:When the door is opened,the LOGO is illuminated onto the open door surface to provide a light to aid entry into and out of the vehicle.
Make sure your car have door lights,Or it can not be fit.
Compatibility:
for Toyota
for 4 Runner 2010 to 2020
for Avalon 2005 to 2018
for Camry 2007 to 2018
for Highlander 2001 to 2018(Not for 2014 Highlander)
for Land Cruiser 2008 to 2018
for Prius 2010 to 2018
for Sequoia 2013 to 2018
for Sienna 2011 to 2018
for Tundra 2007 to 2010
for Venza 2009 to 2018
Input Power: 5w (each LED bulb)
Voltage: DC 12/24V
Installation Instructions:
1. Use A Flathead Screwdriver Or Installation Tool In The Package To Remove And Disconnect Door Step Lights;
2. Plug In new Door Lights With Correspondent Connector;
3. Put new Door Lights To The Spot Where Your Step Lights Were.
4. Done! Logo Should Be Projecting On To The Ground.
colour:white
Material:ABS

Package Contents:
4 * Logo Lights
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.