Bộ 12 / 18 Dụng Cụ Sửa Chữa Vết Lõm Xe Hơi Bằng Kim Loại tại Lotte Market

Giới thiệu Bộ 12 / 18 Dụng Cụ Sửa Chữa Vết Lõm Xe Hơi Bằng Kim Loại tại Lotte Market

Features:
--100% brand new and high quality.
--The principle is making glue tabs stick on the dent and use tools pulling the tabs and lift the dent.
--Big dent needs slide hammer or puller.
--Small dent needs mini dent lifter or pulling bridge.
--Use different size glue tabs to different dent.

HIGH PERFORMANCE: A set of 18 different blue pull tabs for quick and easy repair and removal of dents and dents on the car, and works well with T-hammers or hammers.
18 REPAIR SOLUTIONS: 18 different Pulling Tabs in different sizes, replace the pull tabs of different shapes and sizes to repair the dents and avoid damage to the original paint.
UNIQUE DESIGN: The bottom of each pull tab has a different texture, used in conjunction with the glue stick, can effectively adhere to the dent and use other tools to pull out the dent for repair.
MORE PROFESSIONAL: Made of special high-durability materials. Professional pulling tabs for automotive paint-free repair. Working very well with a mini puller.
Quick and easy repair tool
Suitable for the dent of all kinds of flat metal, such as the surface of automobile metal plate and the washing machine of metal plate
Can be used in all kinds of metal pit plane, such as cars, washing machines, refrigerators, etc.

How to use:
1) Clean the dent with a clean cloth.
2) Mount the glue stick into the glue gun and preheat for 5 minutes.
3) Chose a proper gasket. Large dent requires a large gasket. (Note: The larger the drawing gasket is, the larger the drawing force is).
4) Pull the trigger and apply the drawing gasket with extruded glue (The 4 holes of gasket should be applied with hot melt glue).
5) Fast place the drawing gasket with hot melt glue at the center of dent, press lightly until the glue cures and adheres, cooling for about 8 minutes. (The time should be less than 10 minutes and shorter slightly in winter).
6) Press the drawing gasket with hot melt glue, pull the sliding rod backwards to pull up the dent;
7) Check with a Line board. If dent still exists, knock it slightly with a flattening hammer or pen.
8) Clean the repaired place with a clean wet cloth.
(Pole and glue stick need to be purchased separately, this product is only a mat)

Specification:
Type: Glue Pads
Material:Plastic
Color:blue/pink
Size:as show

Package Contents: 12/18pcs Glue Pads