Notice: file_put_contents(): write of 1902 bytes failed with errno=28 No space left on device in /home/libs.com/public_html/libs_chung/v4/_product.php on line 111

Warning: file_put_contents(): Only -1 of 1902 bytes written, possibly out of free disk space in /home/libs.com/public_html/libs_chung/v4/_product.php on line 111
BITS Mô Đun Hiển Thị Kỹ Thuật Số Tm1637 Cho Arduino 7 Segment 4 Bit 0.36 Inch

BITS Mô Đun Hiển Thị Kỹ Thuật Số Tm1637 Cho Arduino 7 Segment 4 Bit 0.36 Inch tại Lotte Market

Thương hiệu: | Xem thêm Bộ Lưu Điện Thương hiệu  

Mô tả ngắn về BITS Mô Đun Hiển Thị Kỹ Thuật Số Tm1637 Cho Arduino 7 Segment 4 Bit 0.36 Inch tại Lotte Market

The module is a 12-foot clock with 4 points of positive digital (0. Module features are as follows:. Adjustable digital tube 8 gray. 4 M2 screws positioning holes for easy installation. Control Interface: A total of four pins (GND, VCC, DIO, CLK), GND to ground, VCC is the power supply, DIO of data input and output pin, CLK is the
: Còn hàng
: Shopee
42.000đ 42.000đ
** Quét mã QR bằng Zalo để mua trên điện thoại

Giới thiệu BITS Mô Đun Hiển Thị Kỹ Thuật Số Tm1637 Cho Arduino 7 Segment 4 Bit 0.36 Inch tại Lotte Market

The module is a 12-foot clock with 4 points of positive digital (0.36 inches) display module driver IC TM1637, only two signal lines can make SCM four 8-segment LED.BITS Mô Đun Hiển Thị Kỹ Thuật Số Tm1637 Cho Arduino 7 Segment 4 Bit 0.36 Inch

Module features are as follows:

Display of male red for the four digital tubeBITS Mô Đun Hiển Thị Kỹ Thuật Số Tm1637 Cho Arduino 7 Segment 4 Bit 0.36 Inch

Adjustable digital tube 8 gray

Level control interface for 5V or 3.3VBITS Mô Đun Hiển Thị Kỹ Thuật Số Tm1637 Cho Arduino 7 Segment 4 Bit 0.36 Inch

4 M2 screws positioning holes for easy installation

BITS Mô Đun Hiển Thị Kỹ Thuật Số Tm1637 Cho Arduino 7 Segment 4 Bit 0.36 Inch
4 digital display interface module as shown below:

Control Interface: A total of four pins (GND, VCC, DIO, CLK), GND to ground, VCC is the power supply, DIO of data input and output pin, CLK is the clock signal pin;
BITS Mô Đun Hiển Thị Kỹ Thuật Số Tm1637 Cho Arduino 7 Segment 4 Bit 0.36 Inch
Digital tube: 4 common anode score points with 0.36 inches LED, red highlights;

Positioning holes: 4 M2 screws positioning hole diameter is 2.2mm, the positioning of the module is easy to install, to achieve inter-module combination;

Chi Tiết BITS Mô Đun Hiển Thị Kỹ Thuật Số Tm1637 Cho Arduino 7 Segment 4 Bit 0.36 Inch