Bánh răng động cơ bằng đồng thau 14mm 24T 1.5 tại Lotte Market

Giới thiệu Bánh răng động cơ bằng đồng thau 14mm 24T 1.5 tại Lotte Market

----------------------- -Product Information - --------------------------

Ready to send High quality Best price Brand new 100%
Lowest Price Shopee Logo upplier Info invoice
Surprises for you:
Follow shop/ “Like” Items: Priority Shipping & Free Gift

PS: If you want a free gift, please send me the screen that you follow my shop and leave a message on your order.#xiyijiaproduct


Feature:
1. The 24 tooth brass worm gear should be used with a stainless steel worm. The combination of this 24 tooth brass worm and the stainless steel worm that drives it creates a very compact, high torsion and robust 24:1 gear reduction ratio.
2. The combination is self locking and can realize reverse self locking, that is, only the worm can drive the worm wheel, but the worm wheel cannot drive the worm, so that the motor does not need to continue to apply torques to maintain the load.
3. It has a modulus of 1.5 and a center hole diameter of 14mm. It has a robot common hole grid pattern. There is a circular slot on one of the end faces of the gear, which is conducive to not changing the strength of the gear. Greatly reduce the weight of the gear.
4. It can avoid the interference of the protrusion of the screw head used to install the fixed gear, and ensure the flat surface of the installation. If the circular slot affects the assembly, then we can flip the gear and usethe other side of the gear to assemble.
5. The other side of the brass worm gear is a flat surface, this ingenious design facilitates the installation and fixation of the worm gear and expands the use range of the worm gear.

Specification:
Item Type: Brass Worm 
Material: Brass
Model: 4309-0014-0024
Center Aperture: Approx. 14mm/0.6in
Number of Teeth: 24
Module: 1.5
Purpose: Motor Drive Gear

Package List:
1 x
Brass Worm 

How to Use
You can use 3309 series high speed shaft clamps and 3310 series high speed and high load shaft clamps to install and fix this worm gear. The shaft clamp can transmit the torques generated by the gear motor to the output shaft to provide power for the robot. Among them, the high load shaft clamp is the best choice, because the clamping length of the high‑load shaft clamp is much longer than the length of other shaft clamps, reaching 20mm. This greatly increases the contact between more shafts and the surface of the center hole, greatly increases the clamping force and the pressing are