Bảng Mạch Phát Triển Hsv Stm32F 411 Stm32F411Ccu6 32f4 tại Lotte Market

Giới thiệu Bảng Mạch Phát Triển Hsv Stm32F 411 Stm32F411Ccu6 32f4 tại Lotte Market

#STM32F #411 #Development #Board #STM32F411CCU6 #32F4 #Core #Minimum #System #Plate #Learning #Module #DIY
STM32F 411 Development Board STM32F411CCU6 32F4 Core Minimum System Plate Learning Module DIY
Description:

Features:
100% brand new and high quality
1.25MHZ high speed crystal oscillator & 32.768Khz 6PF low speed crystal oscillator
2.Flash pads are reserved, providing USBDisk&&FATFFS routines
3.Jumper cap can be used directly without installation.BOOT0 internal 10K resistance pull-down
4. Factory has burned breathing lamp &&USBCDC test procedures.
5. Provide available MicroPython firmware, configuration files
6. Adjust the direction of the jumping cap if it cannot be installed.Because the jump cap is wide on one side and narrow on the other.
7. V1.3 board with 3 buttons: reset key, BOOT0 key and user button.
V1.3 serial download and DFU download: connect to PA9 and PA10 (connect to usb in DFU mode) by pressing BOOT0 key and reset key, and then release the reset key. After 0.5 seconds, release the BOOT0 key to enter serial download or DFU download. The corresponding software is flymcu or CubeProg.
Jump cap version download: BOOT0 connect to high, BOOT1 connect to high, enter the serial port to download or DFU download, the software is the same as above.

Specification:
Color: Black+Yellow
Size: app. 53x20mm(2.09x0.79in)
Quantity: 1 pc

Note:
Transition: 1cm=10mm=0.39inch
No retail package.
Please allow 1-3cm error due to manual measurement. pls make sure you do not mind before you bid.
Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!

Package includes:
1 x Development Board(other accessories demo in the picture is not included.)