Bảng Mạch Lập Trình Micropython Pyboard V1.1 tại Lotte Market
Thương hiệu: | Xem thêm Linh Kiện Máy Tính Thương hiệuMô tả ngắn về Bảng Mạch Lập Trình Micropython Pyboard V1.1 tại Lotte Market
STM32F405RG microcontroller. 1024KiB flash ROM and 192KiB RAM. Micro SD card slot, supporting standard and high capacity SD cards. Real time clock with optional battery backup. 3x 12-bit analog to digital converters, available on 16 pins, 4 with analog ground shielding. 4 LEDs (red, green, yellow and blue). On-board 3. 6V to 16V. The two mounting tabs on the pyboard: Còn hàng
** Quét mã QR bằng Zalo để mua trên điện thoại
Giới thiệu Bảng Mạch Lập Trình Micropython Pyboard V1.1 tại Lotte Market
STM32F405RG microcontroller
168 MHz Cortex M4 CPU with hardware floating point
1024KiB flash ROM and 192KiB RAM
Micro USB connector for power and serial communication
Micro SD card slot, supporting standard and high capacity SD cards
3-axis accelerometer (MMA7660)
Real time clock with optional battery backup
24 GPIO on left and right edges and 5 GPIO on bottom row, plus LED and switch GPIO available on bottom row
3x 12-bit analog to digital converters, available on 16 pins, 4 with analog ground shielding
2x 12-bit digital to analog (DAC) converters, available on pins X5 and X6
4 LEDs (red, green, yellow and blue)
1 reset and 1 user switch
On-board 3.3V LDO voltage regulator, capable of supplying up to 250mA, input voltage range 3.6V to 16V
DFU bootloader in ROM for easy upgrading of firmware
The two mounting tabs on the pyboard have perforations so that you can snap them off cleanly if needed.
This pyboard comes in a small plastic ESD (anti-static) box.
Differences between PYBv1.0 and PYBv1.1: high-speed crystal changed from 8MHz to 12MHz; LDO changed from MCP1802 to MCP1703; USB VBUS power diode replaced with silicon diode; JST battery connector pads added with protection FET.
Note:with Patterned and without pattern random shipping