Bảng Mạch Kích Hoạt 100w 5a Usb Type-C Pd 5-20v Qc2.0 / 3.0 tại Lotte Market

Giới thiệu Bảng Mạch Kích Hoạt 100w 5a Usb Type-C Pd 5-20v Qc2.0 / 3.0 tại Lotte Market

Description:
100% brand and high quality
This is the bait of PD2.0/3.0.
It is usually used to use power packs with PD protocol, such as power packs or chargers, to deceive the voltage corresponding to the power notebooks and routers.
Feature:
Support PD3.0 and PD2.0 voltage deception output, the mode can be switched freely.
With key lock function to prevent misoperation.
There is an LED output indicator to show the working status.
The parameters are automatically saved, and the last bait setting will be executed when the machine is turned on again.
Ultra-low power consumption, support 100W output.
Parameter:
Name: PD2.0/3.0 bait
Input Voltage: DC 5V
Deception output Voltage: 5V>9V>12V>15V>20V
Maximum output Voltage: 20V
Maximum output Current: 5A
Working Temperature:-25℃~85℃
Work Humidity: 5%~95%RH
Size:44*20*15mm
Instructions for use (must use a power supply with PD protocol):
1. Press and hold the S key, then insert the module into the power supply, and then reset to 5V output (>>” means power on).
2. Press and hold the S+ key, and then insert the module into the power supply. At this time, whether the switch opens the key lock and saves the state after turning on the key. When the key lock is unlocked, it must be unlocked. Adjust the voltage after turning on the power to prevent misoperation.
3. After powering on, press and hold the S+ button, and then press the S button to unlock when the button is locked.
4. After powering on, press and hold the S- button, and then press the S+ button to lock the button.
5. Quick start: Plug the board enters the PD power supply. At this time, the LED light indicates the current to set the decoy voltage. If it is not on, the default is 5V. Adjust the output voltage: The board is locked by default and needs to be unlocked first. The method is to press and hold the S+ button, and then press the S- button. Now the unlocking is complete, you can release the button, and then click the S+ button to increase the voltage, or click the S- button to decrease Voltage.
Instructions for use of test function:
1. Press the S- button and S+ button at the same time, then power on, the module enters the test mode, the output voltage automatically cycles from 5V>9V>12V>15V>20V, and the voltage change time can be adjusted by the S+ button and the S button, seconds.
2. This function is a test function and does not save the mode, which can save switching time.
Interface Description:
1. Type-C AC Male: Type-C male connector: Connect PD power supply as input, which can input 20V 5A voltage and current.
2. C-type F-type interaction emale: Used as connected to the input of the PD power supply, or as an output interface, which can output 20V 5A voltage and current.
3. USB-A female Interface: As an output interface, which can output 20V 3A voltage and current.
4. Positive and negative wiring pads: as an output interface, which can output 20V 5A voltage and current
Package includes：1Pc PD Decoy Trigger Board