Bảng mạch khuếch đại âm thanh kỹ thuật số TAS5630 2X300W AD827 tại Lotte Market
Thương hiệu: | Xem thêm Amply & Mixer Thương hiệuMô tả ngắn về Bảng mạch khuếch đại âm thanh kỹ thuật số TAS5630 2X300W AD827 tại Lotte Market
TAS5630 Class D amplifiers can be driven under a DC48V 4 ohm load and can provide 300W+300W stereo output power. It is the current advanced digital power amplifier,. The rectifier and filter , and the filter should not be less than 22000UF, otherwise the impure power supply will affect the signal-to-noise ratio. Parameter index:. When DC=50V, R=6Ω, THD+N=10%, P=210W. When: Còn hàng
** Quét mã QR bằng Zalo để mua trên điện thoại
Giới thiệu Bảng mạch khuếch đại âm thanh kỹ thuật số TAS5630 2X300W AD827 tại Lotte Market
TAS5630 Class D amplifiers can be driven under a DC48V 4 ohm load and can provide 300W+300W stereo output power. They use PurePathh HD technology and TI advanced closed-loop architecture to realize the next generation of Blu-ray home theater systems, stand-alone home theaters, and professional audio systems High-definition media playback and ultra-low distortion. It is the current advanced digital power amplifier,
This is a flagship digital power amplifier, with excellent analysis and details, very powerful driving force, and very low power consumption.
The rectifier and filter , and the filter should not be less than 22000UF, otherwise the impure power supply will affect the signal-to-noise ratio. In addition, exposed components such as potentiometers are best to be shielded, and they are as quiet as the deep sea according to the specifications.
Parameter index:
When DC=50V, R=4Ω, THD+N=10%, P=300W
When DC=50V, R=6Ω, THD+N=10%, P=210W
When DC=50V, R=8Ω, THD+N=10%, P=160W
When DC=50V, R=4Ω, THD+N=1%, P=240W
When DC=50V, R=6Ω, THD+N=1%, P=160W
When DC=50V, R=8Ω, THD+N=1%, P=125W
Total harmonic distortion (THD+N): Less than 1%
Signal-to-noise ratio (SNR): Greater than 100dB
Input impedance: 20KΩ
Output offset voltage: Less than 150mV
Voltage gain: adjustable
Conversion rate (SR): 50V/us
Frequency response range: 20Hz--20kHz
Power supply range: DC20--DC50V (20-45V range is recommended, 48-50V limit voltage is not recommended)
Precautions for use: The board is powered by DC, do not directly input AC, use an AC transformer, and connect an external rectifier bridge and filter . In addition, the DC power supply should not exceed 50V or less than 20V. It will not start if it is less than 20V. In addition, the output power is related to the power of the power supply, and the power at 50V will be more than 4 times larger than that at 20V.
Colour:As shown
Material:PCB+metal
Size:101.6x98.5mm
Package Contents:
1 * power amplifier board
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.