Bảng Mạch Điều Khiển Tốc Độ Động Cơ Dc 6-36v 12v 24v 36v 6-36v 15a tại Lotte Market

Giới thiệu Bảng Mạch Điều Khiển Tốc Độ Động Cơ Dc 6-36v 12v 24v 36v 6-36v 15a tại Lotte Market

”15A high-power DC motor drive board, stable and reliable, industrial grade
Model: XY-15AS

Highlights:
1. Product industrial grade design, stable and reliable, with anti-static circuit, transient suppression protection, undervoltage protection, interface ESD and overvoltage protection, etc.;
2. Support voltage 9-36V wide range, maximum continuous load current 12A (without heat dissipation), 15A (simple heat dissipation), 20A (thick large heat sink);
3. Similar to L298 drive logic, three wires (PWM, IN1, IN2) can control speed regulation, forward and reverse rotation and brake;
4. Support full PWM, you can directly use the buttons to control the forward and reverse rotation, the effective range of PWM is 0.1%~100.0%;
5. It can provide 5V power supply for microcontrollers and other controllers, and has 5V output overcurrent protection and access signal overvoltage protection.
Control signal logic

Note: 0 is low level, 1 is high level, × is any level, and it is low level when it is floating.

COM is the signal ground, and 5VO is 5V output, which can provide 5V power for microcontrollers and other controllers; PWM pin can be connected with PWM. If the button control mode is used, PWM pin should be connected with 5VO; IN1 and IN2 are two-way motor forward and reverse , Brake (or brake) control signal.

parameter
1. The power supply voltage is 6V-36V (the voltage is too low, the load current is large and the module is easy to damage, so the circuit board is marked as 9-36V). The power supply must not be reversed or exceed 37V, otherwise the module may be burned out. A 20A fuse is connected in series at the input.
2. The drive is not used for heat dissipation. The rated current is 12A. For the rated current of 12A～15A, simple heat dissipation is required. For 15A～20A, thick heat dissipation is required. (Easy heat dissipation-such as placing a 1mm thermal silica pad under the module and then fixing the module to the device wall with a 5mm copper pillar)
3. The control signal interface (orange) can provide users with 5V externally, and the single-chip microcomputer does not need additional power supply. The maximum power supply current is 0.5A.
4. Control signal high-level voltage: 2.0V～5.5V, compatible with 3.3V and 5V TTL levels;
Low-level voltage of control signal: 0V～0.8V, 0V when floating;
When the control signal voltage is 5V, the control signal current is 50uA.
5. The effective range of PWM: 0.1%～100.0%;
PWM signal frequency range: 0~100KHz (20KHz is recommended);
PWM zui small effective pulse width: 200ns.
6. Working temperature -25℃-80℃.
7. Product size: 55*55*25mm (length, width and height).
8. Mounting hole diameter: 3mm.

More details can feel free to contact us, Thanks ^^”