Bảng Mạch Bảo Vệ Pin Sạc Cân Bằng 3s 30a Bms 18650 tại Lotte Market

Giới thiệu Bảng Mạch Bảo Vệ Pin Sạc Cân Bằng 3s 30a Bms 18650 tại Lotte Market

Feture:
Scope: Suitable for ternary lithium battery with 3.7V rated voltage and 4.2V full voltage (including 18650, 26650, polymer battery, no size limit)
Charging Voltage: 12.6 V-13.6 V
Continuous discharge current (upper limit): 30A If the ambient heat dissipation is not good, please reduce the current load.
Contínua corrente de carga (limite superior): 20A
Enhanced Version: Suitable for electric drills with a starting current of 60A or less, power less than 130 W, or resistive loads below 378 W
Balanced version: Suitable for electric drills with starting current below 60A, power below 130 W, or resistive load below 378 with balanced charging function.
Note 1: Three power batteries or six 5C-10C 10C-20C power batteries are required to successfully start the drill (recommended power battery model: VTC4 VTC4A VTC5A VTC6)
Note 2: Strictly follow the wiring diagram 0V, 4.2V, 8.4V, 12.6V, do not touch all components on the board when the solder wire, unintentionally short circuit
Note 3: When welding the battery for the first time or charging, while the single battery is greater than 4.2 V, the 430 resistor will heat up and discharge (discharge to about 4.19 V to stop heating). If the 430 resistor is severely heated (heat is not enough to touch, please check if the wrong line is connected)
 
Package Included：
1*1 * Protection board Balanced