Notice: file_put_contents(): write of 3011 bytes failed with errno=28 No space left on device in /home/libs.com/public_html/libs_chung/v4/_product.php on line 111

Warning: file_put_contents(): Only -1 of 3011 bytes written, possibly out of free disk space in /home/libs.com/public_html/libs_chung/v4/_product.php on line 111
Bảng mạch bảo vệ pin lithium 18650 3S 12V 8A 11.1V 12.6V - Lotte Market

Bảng mạch bảo vệ pin lithium 18650 3S 12V 8A 11.1V 12.6V tại Lotte Market

Thương hiệu: | Xem thêm Dụng cụ & Thiết bị tiện ích Thương hiệu  

Mô tả ngắn về Bảng mạch bảo vệ pin lithium 18650 3S 12V 8A 11.1V 12.6V tại Lotte Market

For products with a current above 3A, the battery discharge rate must be above 3C. 3C rate battery, 2000 capacity is equal to 2AH*3=6A upper limit working current. In this case, it cannot be used for a long time, and the battery will be damaged quickly. 8V (rated voltage of polymer battery). 7V lithium battery rated voltage). Discharge 10A (refers
: Còn hàng
: Shopee
64.644đ 64.644đ
** Quét mã QR bằng Zalo để mua trên điện thoại

Giới thiệu Bảng mạch bảo vệ pin lithium 18650 3S 12V 8A 11.1V 12.6V tại Lotte Market

note:Bảng mạch bảo vệ pin lithium 18650 3S 12V 8A 11.1V 12.6V<br />
For products with a current above 3A, the battery discharge rate must be above 3C.
The magnification calculation formula: 1C battery, 2000 capacity is equal to 2AH*1=2A upper limit working current.
3C rate battery, 2000 capacity is equal to 2AH*3=6A upper limit working current.
In use, the battery will heat up, which means that the battery rate is not applicable. In this case, it cannot be used for a long time, and the battery will be damaged quickly.

description:Bảng mạch bảo vệ pin lithium 18650 3S 12V 8A 11.1V 12.6V<br />
3 strings (for 3 18650 batteries or polymer lithium batteries in series combination)
10.8V (rated voltage of polymer battery)
11.1V (18650 or 3.7V lithium battery rated voltage)
12.6V (Voltage after fully charged lithium battery)
Discharge 10A (refers to the upper limit discharge current limit)

Note 1: Wiring 0V (B-), 3.7V (B1), 7.4V (B2), 11.1V (B+) strictly according to the diagram, do not intentionally short-circuit!
Note 2: After the line is connected, it needs to be charged before output.
Note 3: When connecting 3 groups of batteries in series, please ensure that the voltage of each group of batteries is the same. If they are not the same, please charge each group of batteries individually and use them in series. During the discharge test, the battery whose voltage drops fast is a bad battery.

Explain:
Don't mix good batteries and bad batteries together! The closer the capacity/internal resistance of the 3 sets of batteries, the better! (2 good batteries + 1 bad battery = 3 bad batteries).Bảng mạch bảo vệ pin lithium 18650 3S 12V 8A 11.1V 12.6V<br />

Attributes:
Model: HX-3S-03
Overcharge voltage range: 4.25-4.35v±0.05v
Size: 30*30*2.8mm
Over-discharge voltage range: 2.3-3.0v±0.05vBảng mạch bảo vệ pin lithium 18650 3S 12V 8A 11.1V 12.6V<br />
Maximum operating current: 6-8A
Working temperature: -40---+50℃
Upper limit instantaneous current: 9-10A
Storage conditions: -40-- +80℃
Quiescent current: less than 30uA
Effective life: more than 30000 hoursBảng mạch bảo vệ pin lithium 18650 3S 12V 8A 11.1V 12.6V<br />
Internal resistance: less than 100mΩ
Short-circuit protection: can be protected, delayed self-recovery.
Charging voltage: 12.6V-13V

Chi Tiết Bảng mạch bảo vệ pin lithium 18650 3S 12V 8A 11.1V 12.6V