Bảng Mạch Bảo Vệ Pin 2s 8a Li-Ion 7.4v 8.4v 18650 Bms Pcm 10a tại Lotte Market
Thương hiệu: | Xem thêm Mạch & Bộ phận điện Thương hiệuMô tả ngắn về Bảng Mạch Bảo Vệ Pin 2s 8a Li-Ion 7.4v 8.4v 18650 Bms Pcm 10a tại Lotte Market
The lithium battery protection board cannot be used for lithium iron phosphate batteries, hand drill batteries, electric fish machine battery packs, electric bicycle battery packs, children's car batteries, power motors above 550, 1W fisheye LED lights, for the above Please pay attention to customers who purchase in combination!. Massager battery pack, LED lamp backup power supply, 12V electronic products, solar: Còn hàng
** Quét mã QR bằng Zalo để mua trên điện thoại
Giới thiệu Bảng Mạch Bảo Vệ Pin 2s 8a Li-Ion 7.4v 8.4v 18650 Bms Pcm 10a tại Lotte Market
note:
The lithium battery protection board cannot be used for lithium iron phosphate batteries, hand drill batteries, electric fish machine battery packs, electric bicycle battery packs, children's car batteries, power motors above 550, 1W fisheye LED lights, for the above Please pay attention to customers who purchase in combination!
The described power range applies to the following products:
Massager battery pack, LED lamp backup power supply, 12V electronic products, solar street lamp battery pack
, Monitor standby power, and other products.
The main function:
Overcharge protection, overdischarge protection, short circuit protection, overcurrent protection
Wiring instructions:
B+ connected to the battery positive
B- Connected to the negative terminal of the battery
MB connects the connection point between battery 1 and battery 2
Connect P+ to the positive terminal of the charging/discharging terminal (the charging terminal/discharging terminal is common)
P- connected to the negative terminal of the charge/discharge terminal (the charging terminal/discharge terminal is common)
Tips:
When combining battery packs, the battery voltage, capacity, and internal resistance must be paired. The battery
The voltage is appropriate at the rated voltage of about 3.7V. After the battery pack is assembled, there is no output. Use 8.4V.
Just press charge.
Model: HX-2S-D01
Size: 41*16*3.5mm
Maximum working current: 8A
Maximum instantaneous current: 10A
2S Lithium Blue:
Over charge voltage:4.28v±0.05v
Over dishcarge voltage: 2.9v±0.05v
Charging voltage: 8.4V
Max continuous current:8A
Max peak current:10A
Small current:less than 3uA
Life cycle :more than 50000hours
Resistance:Less than 300mΩ
Short cut protection :Protectable, delayed self-recovery
2S LifePo4 Green:
Over charge voltage:3.65v±0.05v
Over dishcarge voltage: 2.0v±0.05v
Quiescent Current:less than 3uA
Charging voltage: 7.2-8.4V
Short cut protection :Delay protection, delay self-recovery
Package:
1 x Battery Protection Board