Bảng mạch bảo vệ BMS PCB cho pin 18650 11.1V 12V 12.6V Li-ion tại Lotte Market

Giới thiệu Bảng mạch bảo vệ BMS PCB cho pin 18650 11.1V 12V 12.6V Li-ion tại Lotte Market

Features:
Three series of lithium battery protection board.
Automatically cancel protection after protection conditions restore.
With function of overcharge protection, over discharge protection, short circuit protection, over-current protection.
Suitable for lithium battery pack of 11.1V, 12V, 12.6V.
Fine workmanship and durable.
Quiescent current＜ 30uA, so power consumption is small.

Specifications:
Type(Optional): #1(9-10A), #2(10-13A)
Model: 1#:HX-3S-01, 2#:HX-3S-FL10-A
Size:
#1:  50 * 16 * 1.0mm/1.97 * 0.63 * 0.04inch
#2:  53 * 17 * 4.0mm/2.09 * 0.67 * 0.16inch
Over voltage range: 4.25-4.35v±0.05v
Over discharge voltage range: 2.3-3.0v±0.05v
Maximum operating current: 6-8A
Maximum transient current: #1: 9-10A,  #2:10-13A
Quiescent current: ＜ 30uA
Internal resistance: ＜ 100mΩ
Charging voltage: 12.6v - 13V
Working temperature: -40~+50℃
Storage condition: -40~ +80℃
Effective life: >30000h
Short circuit protection: Yes, delayed self recovery
The component included:
#1: 1 pcs S-8254AA protection chip, 4 pcs AO4407
#2: 1 pcs 2110-cb protection chip, 2 pcs AOD472

Notes:
1. Higher than 3A current discharge product, the discharge rate of battery discharge is above 3C.
2.Multiplier calculation formula: 1C battery, 2000 capacity is equal to 2AH * 1 = 2A maximum working current.
3C ratio battery, 2000 capacity is equal to 2AH * 3 = 6Amaximumworking current.
3.In the process of use, if the battery heat, the battery power is
not applicable. This situation cannot be used for a long time.Otherwise, the
battery will soon be damaged.

Package Included:
1 x PCB Protection Board(have assembled)

#PCBProtectionBoard#BatteryProtectionboard#ControlBoard#ChargingController#ProtectionModule