AC 110-220V / DC 12-72V SHT2000 10A Bộ điều nhiệt độ ẩm kỹ thuật số Máy đo độ ẩm nhiệt độ với đầu dò tại Lotte Market
Thương hiệu: | Xem thêm Mạch & Bộ phận điện Thương hiệuMô tả ngắn về AC 110-220V / DC 12-72V SHT2000 10A Bộ điều nhiệt độ ẩm kỹ thuật số Máy đo độ ẩm nhiệt độ với đầu dò tại Lotte Market
Setting method: Start value stop value (the program automatically determines the working mode is cooling/dehumidifying mode). Setting mode: setting (starting temperature): Press and hold the ▲ button to start the temperature flashing. Setting (stop temperature): Press and hold the ▼ button to stop the temperature flashing. Heating use case: control the water heater, heat to 65 ° C to stop,: Còn hàng
** Quét mã QR bằng Zalo để mua trên điện thoại
Giới thiệu AC 110-220V / DC 12-72V SHT2000 10A Bộ điều nhiệt độ ẩm kỹ thuật số Máy đo độ ẩm nhiệt độ với đầu dò tại Lotte Market
Setting method: Start valueSetting method: Start value > stop value (the program automatically determines the working mode is cooling/dehumidifying mode)
Heating/cooling mode setting
Setting mode: setting (starting temperature): Press and hold the ▲ button to start the temperature flashing. Use ▲▼ key to set the starting temperature value.
Setting (stop temperature): Press and hold the ▼ button to stop the temperature flashing. Use ▲▼ to set the stop temperature value.
Heating use case: control the water heater, heat to 65 ° C to stop, the temperature drops back to 50 ° C and start heating again
The first step: heating mode, starting temperature
Step 3: Press and hold the ▼ button to stop the temperature flashing. Set the stop temperature to 65 °C with ▲▼ keys, and the setting is completed!
Refrigeration use case: use in the farm, the fan is ventilated to 26 ° C to stop, the temperature is raised to 30 ° C and the ventilation is started again.
The first step: cooling mode, starting temperature > stop temperature
Step 2: Press and hold the ▲ button to start the temperature flashing. Use ▲▼ to set the starting temperature to 30 °C.
The third step: long press the ▼ button to stop the temperature flashing, set the stop temperature to 26 °C by ▲▼, the setting is completed!
Humidification/Dehumidification Mode Settings:
Setting (start humidity): Press and hold △ key to start the humidity value flashing. Set the humidity value by △ ▽ key. Set [Stop Humidity]: Press and hold △ key to stop the humidity value flashing, and set the humidity to stop by △ ▽ key value.
Humidification example: fresh supermarket humidification, control humidifier 50% RH began to humidify, humidified to 80% RH to stop humidification.
Setup steps:
Step 1: Press and hold the △ button for 3 seconds to start the humidity value flashing, and set the starting humidity value to 50% RH.
Step 2: Press and hold the ▽ button for 3 seconds to stop the humidity value flashing. Set the value to 80% RH. After the setting is completed, the button will be operated for 5 seconds without returning to the normal display state.
Dehumidification example: workshop control exhaust dehumidification system, humidity 70% RH starts dehumidification, humidity 40% RH stops dehumidification
Package:
1 x SHT2000 Temperature & Humidity Hygrometer Thermostat Controller Sensor