Notice: file_put_contents(): write of 3052 bytes failed with errno=28 No space left on device in /home/libs.com/public_html/libs_chung/v4/_product.php on line 111

Warning: file_put_contents(): Only -1 of 3052 bytes written, possibly out of free disk space in /home/libs.com/public_html/libs_chung/v4/_product.php on line 111
1 Tuýp Keo Tản Nhiệt Ngôi Sao 5g # 8y - Lotte Market

1 Tuýp Keo Tản Nhiệt Ngôi Sao 5g # 8y tại Lotte Market

Thương hiệu: | Xem thêm Keo Tản Nhiệt Thương hiệu  

Mô tả ngắn về 1 Tuýp Keo Tản Nhiệt Ngôi Sao 5g # 8y tại Lotte Market

Dear, welcome to walkaround, here are your favorite products, welcome to buy, we also provide 24H online Q&A to solve your problems. 1pc 5g Heatsink Plaster STARS-922 Thermal Silicone Adhesive Cooling Paste Strong Adhesive Compound Glue. The surface curing time is short, the adhesive force is strong, the storage period is long, non-toxic and solvent free. It is suitable for
: Còn hàng
: Shopee
14.000đ 15.000đ
** Quét mã QR bằng Zalo để mua trên điện thoại

Giới thiệu 1 Tuýp Keo Tản Nhiệt Ngôi Sao 5g # 8y tại Lotte Market

Dear, welcome to walkaround, here are your favorite products, welcome to buy, we also provide 24H online Q&A to solve your problems. About product, please look down~1 Tuýp Keo Tản Nhiệt Ngôi Sao 5g # 8y

1pc 5g Heatsink Plaster STARS-922 Thermal Silicone Adhesive Cooling Paste Strong Adhesive Compound Glue

Features:
1. It has good conductivity and wide service temperature range(-60~200℃), short term 300℃ high temperature.1 Tuýp Keo Tản Nhiệt Ngôi Sao 5g # 8y
2. The surface curing time is short, the adhesive force is strong, the storage period is long, non-toxic and solvent free.
3. It can be applied safely in elastic adhesion, heat dissipation, insulation and encapsulation in electronics, electrical appliances, instruments, LED, heat sinks and other industries.
4. It is suitable for all kinds of components, LED and heat dissipation devices which need to be bonded directly. It has high strength and fast adhesion effect.

Specifications:1 Tuýp Keo Tản Nhiệt Ngôi Sao 5g # 8y
Weight: approx. 5g
Adhesive Material type: memory.MOSFET heat sink fin heat sink. North and South Bridge etc.
Hot melt adhesive type: other
Shear strength: 1.5 (MPa)
Active use period: 10 (min)1 Tuýp Keo Tản Nhiệt Ngôi Sao 5g # 8y
Shelf life: 12 (months)
Solidification time: 3min 25°C
Color: White
Thermal conductivity: >;0.671W/m.k
Surface curing time: 10MIN/25℃ 1 Tuýp Keo Tản Nhiệt Ngôi Sao 5g # 8y

Operation Manual:
1. When it is used, the product is directly extruded, rubbed and glued to the surface of the adhesive, and then covered immediately after the test, so as to be tried again.
2. The surface fixed speed is related to the relative humidity and temperature in the air; the higher the temperature, the faster the curing rate is, the slower the vice versa.
3. Recommended coating thickness: 0.1-0.5mm, the thinner the better.1 Tuýp Keo Tản Nhiệt Ngôi Sao 5g # 8y
4. Before use, please clean with solvent (such as alcohol) adhesive surface, detergents should be surface to be clean before painting.

Note:
Please allow 1-3 cm differs due to manual measurement.
Due to the different display and different light, the picture may not show the actual color of the item. Thanks for your understanding.1 Tuýp Keo Tản Nhiệt Ngôi Sao 5g # 8y

Chi Tiết 1 Tuýp Keo Tản Nhiệt Ngôi Sao 5g # 8y